Oracle^® Server X8-2 Service Manual

Unmount an NVMe Storage Drive

1. Log in to Oracle Solaris that is running on the server.
2. To find the NVMe drive slot number, type:

   # hotplug list –lc

   This command produces output similar to the following for each of the NVMe drives installed in the server:

   # hotplug list –lc
   Connection  State    Description Path
   --------------------------------------------------------------------------------------- 
   Slot100     ENABLED  PCIe-Native /pci@13,0/pci8086,2030@0/pci111d,80b5@0/pci111d,80b5@5

3. To prepare the NVMe drive for removal, that is, to detach the device driver and power off the drive slot, type the following commands:

   # hotplug poweroff Slot100

   # hotplug list –lc

   The following output appears for the NVMe drive that has been unmounted:

   # hotplug list –lc
   Connection  State    Description Path
   ---------------------------------------------------------------------------------------
   Slot100     PRESENT  PCIe-Native /pci@13,0/pci8086,2030@0/pci111d,80b5@0/pci111d,80b5@5

4. Verify that the OK to Remove indicator (LED) on the NVMe storage drive is lit.