|Skip Navigation Links|
|Exit Print View|
|Sun Network QDR InfiniBand Gateway Switch HTML Document Collection for Firmware Version 2.0|
When you want to know if the voltages used by the various components within the gateway are within nominal values, use the checkvoltages command. If a voltage deviates more than 10% of its nominal value, there is a problem. This check also reports if a battery has failed.
# checkvoltages Voltage ECB OK Measured 3.3V Main = 3.30 V Measured 3.3V Standby = 3.42 V Measured 12V = 12.06 V Measured 5V = 5.03 V Measured VBAT = 3.17 V Measured 1.0V = 1.01 V Measured I4 1.2V = 1.22 V Measured 2.5V = 2.51 V Measured V1P2 DIG = 1.18 V Measured V1P2 ANG = 1.18 V Measured 1.2V BridgeX = 1.22 V Measured 1.8V = 1.80 V Measured 1.2V Standby = 1.20 V All voltages OK #
Gateway Reference, checkvoltages command