Rack Packaging
Refer to the unpacking instructions included with the packaging when unpacking the rack from the shipping carton. After unpacking the rack, follow local laws and guidelines to recycle the packaging properly.
 | Caution - Carefully unpack the rack from the packaging and shipping pallet. Rocking or tilting the rack can cause it to fall over and cause serious injury or death. Always use professional movers when unpacking and installing the rack. |
| Caution - When unpacking at the installation site, or when repackaging and moving the rack to a new location, verify that the leveling feet are up before moving the rack. |
After unpacking the rack from the packaging, save the shipping brackets used to secure the rack to the shipping pallet. Do not dispose of these brackets, because you cannot order replacement brackets.
| Caution - Shipping brackets are not for use for bracing or anchoring the rack during seismic events. |
The rack can ship in two different packaging options, the standard packaging and the enterprise packaging. The standard packaging is suitable only for shipping empty racks. The heavy-duty enterprise packaging is suitable for shipping racks with factory-installed or customer loaded equipment.
| Caution - The standard packaging was designed solely for shipping an empty rack. Never install equipment in the rack while it is on this pallet, and never repack a rack in the standard packaging. If you must populate the rack prior to moving it to a new building or site, repack the rack in the enterprise packaging. |
Contact your sales representative for information about ordering empty enterprise packaging. For instructions on how to repack a rack in the enterprise packaging, see Repack the Rack in the Enterprise Packaging.