Host Configuration Parameters

Table 42  Host Configuration Parameters (set Command) Available Starting with FW 2.02

Parameters Syntax Response snmp_nms_host pducli -> set snmp_nms_host.x=yyyy (yyyy= Host Name, Host x from 1-4) pducli-> set OK (or an error message) snmp_nms_community_readonly pducli -> set snmp_nms_community_readonly.x=yyyy (yyyy= ReadOnly-Community, Host x from 1-4) pducli-> set OK (or an error message) snmp_nms_community_readwrite pducli -> set snmp_nms_community_readwrite.x=yyyy (yyyy= ReadWrite-Community, Host x from 1-4) pducli-> set OK (or an error message) snmp_nms_accessright pducli -> set snmp_nms_accessright.x=y (0=readonly, 1=read/write, 2=both, Host x from 1-4) pducli-> set OK (or an error message) snmp_nms_enable pducli-> set snmp_nms_enable.x=On (or Off, Host x from 1-4) pducli-> set OK (or an error message) snmp_traptarget_host pducli-> set snmp_traptarget_host.x (x=management-server-123.company.org) pducli-> set OK (or an error message) snmp_traptarget_version pducli-> set snmp_traptarget_version.x=2 pducli-> set OK (or an error message) snmp_traptarget_enable pducli-> set snmp_traptarget_enable.x=On pducli-> set OK (or an error message) snmp_nms_traptargethost pducli-> set snmp_nms_traptargethost.x=yyyy (yyyy= Host Name, TrapTarget x from 1-10) pducli-> set OK (or an error message) snmp_nms_traptarget_community pducli-> set snmp_nms_traptarget_community.x=yyyy (yyyy= SNMP Trap Community, TrapTarget x from 1-10) pducli-> set OK (or an error message) snmp_nms_traptarget_version pducli -> set snmp_nms_traptarget_version.x=y (1=SNMPv1, 2=SNMPv2, 3=SNMPv3, TrapTarget x from 1-10) pducli-> set OK (or an error message) snmp_nms_traptarget_enable pducli -> set snmp_nms_traptarget_enable.x=On (or Off, TrapTarget x from 1-10) pducli-> set OK (or an error message) syslogserver_host pducli -> set syslogserver_host.x=yyyy (yyyy= SyslogServer-Host, SyslogServer x from 1-4) pducli-> set OK (or an error message) syslogserver_enable pducli -> set syslogserver_enable.x=On (or Off, SyslogServer x from 1-4) pducli-> set OK (or an error message)

Table 43  Host Configuration Parameters (get Command) Available Starting with FW 2.02

Parameters Syntax Response snmp_nms_host pducli -> get snmp_nms_host.x pducli-> -> snmp_nms_host.x= yyyy (yyyy= Host Name, Host x from 1-4) snmp_nms_community_readonly pducli -> get snmp_nms_community_readonly.x (x= Host-Number 1-4) pducli -> snmp_nms_community_readonly.x=yyyy (yyyy= ReadOnly-Community for Host x) snmp_nms_community_readwrite pducli -> get snmp_nms_community_readwrite.x (x= Host-Number 1-4) pducli -> snmp_nms_community_readwrite.x =yyyy (yyyy= ReadWrite-Community for Host x) snmp_nms_accessright pducli -> get snmp_nms_accessright.x x= Host-Number 1-4) pducli -> snmp_nms_accessright.x=y (0=readonly, 1=read/write, 2=both, for Host x) snmp_nms_enable pducli-> get snmp_nms_enable.x (x= Host-Number 1-4) pducli-> snmp_nms_enable.x=On (or snmp_nms_enable.x=Off for Host x) snmp_traptarget_host pducli-> get snmp_traptarget_host.x (x= TrapTarget-Number from 1-10) pducli-> snmp_traptarget_host.x=yyyy (yyyy= Host Name for TrapTarget x) snmp_traptarget_community pducli -> get snmp_nms_traptarget_community.x (x=TrapTarget-Number from 1-10) pducli-> snmp_nms_traptarget_community.x=yyyy (yyyy= SNMP TrapCommunity for TrapTarget x) snmp_traptarget_version pducli -> get snmp_nms_traptarget_version.x (x= TrapTarget from 1-10) pducli -> snmp_nms_traptarget_version.x=y (1=SNMPv1, 2=SNMPv2, 3=SNMPv3 for TrapTarget x) snmp_traptarget_enable pducli -> get snmp_nms_traptarget_enable.x (x= TrapTarget from 1-10) pducli -> snmp_nms_traptarget_enable.x=On (or snmp_nms_traptarget_enable.x=Off for TrapTarget x) syslogserver_host pducli -> get syslogserver_host.x (x= SyslogServer-Number from 1-4) pducli -> syslogserver_host.x=yyyy (yyyy= SyslogServer-Host for SyslogServer x) syslogserver_enable pducli -> get syslogserver_enable.x (x= SyslogServer-Number from 1-4) pducli -> syslogserver_enable.x=On (or syslogserver_enable.x=Off for SyslogServer x)