User Configuration Parameters

Table 44  User Configuration Parameters (set Command) Available Starting with FW 2.02

Parameters Syntax Response user_name pducli -> set user_name.x=yyyy (yyyy= UserName, User-Number x from 1-5) pducli-> set OK (or an error message) user_password pducli -> set password.x=yyyy(yyyy= UserPassword, User-Number x from 1-5) pducli-> set OK (or an error message) user_accessright pducli -> set accessright.x=y (1= User, 2= Admin, User-Number x from 1-5) pducli-> set OK (or an error message) user_snmpv3_name pducli -> set user_snmpv3_name.x=yyyy (yyyy= SNMPv3-UserName, SNMPv3- User x from 1-10) pducli-> set OK (or an error message) user_snmpv3_security_level pducli -> set user_snmpv3_name.x=y (0= No Auth/No Priv, 1= Auth/No Priv, 2= Auth/Priv, Userx from 1-10) SNMPv3 UserName, SNMPv3 User x from 1-10) pducli-> set OK (or an error message) user_snmpv3_auth_alg pducli -> set user_snmpv3_auth_alg.x=y (0= MD 3, 1 = SHA, SNMPv3 User x from 1-10) pducli-> set OK (or an error message) user_snmpv3_auth_password pducli -> set user_snmpv3_auth_password.x=yyyy (yyyy= SNMOv3-AuthPassword, SNMPv3- User x from 1-10) pducli-> set OK (or an error message) user_snmpv3_priv_alg pducli -> set user_snmpv3_priv_alg.x=y (0= DES, 2= AES, 3= AES192, 4= AES256, SNMPv3- User x from 1-10) pducli-> set OK (or an error message) user_snmpv3_priv_password pducli -> set user_snmpv3_priv_password.x=yyyy (yyyy= SNMPv3-PrivPassword, SNMPv3- User x from 1-10) pducli-> set OK (or an error message) user_snmpv3__accessright pducli -> set user_snmpv3_accessright.x=y (0=readonly, 1=readwrite, SNMPv3- User x from 1-10) pducli-> set OK (or an error message) user_snmpv3_enable pducli -> set user_snmpv3_enable.x=On (or Off, SNMPv3- User x from 1-10) pducli-> set OK (or an error message)

Table 45  User Configuration Parameters (get Command) Available Starting with FW 2.02

Parameters Syntax Response user_name pducli -> get user_name.x (x= User-Number from 1-5) pducli -> user_name.x=yyyy (yyyy= UserName for x) user_accessright pducli -> get accessright.x (x= UserName-Number from 1-5) pducli -> accessright.x=y(1= User, 2=Admin for User x) user_snmpv3_name pducli -> get user_snmpv3_name.x (x=SNMPv3-User-Number from 1-10) pducli -> user_snmpv3_name.x=yyyy (yyyy= SNMPv3-UserName for SNMPv3- User x) user_snmpv3_security_level pducli -> get user_snmpv3_name.x (x= SNMPv3-User-Number from 1-10) pducli -> user_snmpv3_name.x=y (0= No Auth/No Priv, 1= Auth/No Priv, 2= Auth/Priv for SNMPv3- User x) user_snmpv3_auth_alg pducli -> get user_snmpv3_auth_alg.x (x= SNMPv3-User-Number from 1-10) pducli -> user_snmpv3_auth_alg.x=y (0= MD 5, 1= SHA, SNMPv3-User )x user_snmpv3_priv_alg pducli -> get user_snmpv3_priv_alg.x (x = SNMPv3-User-Number from 1-10) pducli - >user_snmpv3_priv_alg.x=y (0= DES, 2= AES, 3= AES192, 4= AES256, for SNMPv3- User x) user_snmpv3_accessright pducli -> get user_snmpv3_accessright.x (x= SNMPv3-User-Number from 1-10) pducli -> user_snmpv3_priv_password.x=yyyy (0=readonly, 1=readwrite for SNMPv3- User x) user_snmpv3_enable pducli -> get user_snmpv3_enable.x (x= SNMPv3-User-Number from 1-10) pducli -> user_snmpv3_enable.x=On (or user_snmpv3_enable.x=Off for SNMPv3- User x)