Restore the PDU to Factory Default Settings (RS-232) - Sun Rack II Power Distribution Units User's Guide

Go to main content

Sun Rack II Power Distribution Units User's Guide

Exit Print View

» ...Documentation Home » Sun Rack II 1042 Documentation Library » Sun Rack II Power Distribution Units User's Guide » Monitoring Enhanced PDUs » Restoring the PDU to Factory Default Settings ... » Restore the PDU to Factory Default Settings ...

Updated: December 2016

Sun Rack II Power Distribution Units User's Guide

Document Information

Using This Documentation

Understanding PDUs

Confirming Facility Requirements and PDU Specifications

Preparing for Installation

Installing PDUs Into a Sun Rack II Cabinet

Connecting Standard PDUs to the Network

Monitoring Original PDUs

Monitoring Enhanced PDUs

Understanding the Relationship Between Inputs and Outlet Groups

Relationship Between Inputs and Outlet Groups Overview

Single-Phase PDU Input and Outlet Group Relationship

Three-Phase PDU Input and Outlet Group Relationship

Access a Metering Unit on the Network (Enhanced PDU)

Set Threshold Parameter Values (Enhanced PDU)

Monitoring an Enhanced PDU

Monitor the Enhanced PDU (LCD Screen)

Monitor the Enhanced PDU (HTML Interface)

Monitor the Enhanced PDU (RS-232)

Monitor the Enhanced PDU (SSH)

Changing Interface Settings (Enhanced PDU)

Set the PDU Information (Enhanced PDU)

Add Users and Change Passwords (Enhanced PDU)

Send System Log Messages to Systems on the Network (Enhanced PDU)

Enabling and Configuring SNMP (Enhanced PDU)

Types of PDU Metering Unit SNMP Traps (Enhanced PDU)

Enable and Configure SNMP (Enhanced PDU)

Configure SNMP Traps

Verifying and Updating the Firmware (Enhanced PDU)

View Module Information (Enhanced PDU)

Update the PDU Metering Unit Firmware (HTML)

Update the PDU Metering Unit Firmware (SSH)

Administering the PDU Metering Unit (Enhanced PDU)

Reset the Enhanced PDU Metering Unit (Reset Button)

Reboot the Enhanced PDU Metering Unit (LCD)

Reboot the Enhanced PDU Metering Unit (HTML)

Reboot the Enhanced PDU Metering Unit (RS-232)

Reboot the Enhanced PDU Metering Unit (SSH)

View Status Information on the LCD Screen (Enhanced PDU)

Adjust the LCD Screen (Enhanced PDU)

Set the PDU System Time

Access the Event Logging Page

Restoring the PDU to Factory Default Settings (Enhanced PDU)

Restore the PDU to Factory Default Settings (LCD)

Restore the PDU to Factory Default Settings (HTML)

Restore the PDU to Factory Default Settings (RS-232)

Restore the PDU to Factory Default Settings (SSH)

NET MGT Port LED and Pin Descriptions

SER MGT Ports and Pin Descriptions

Understanding CLI Commands

Language:

Restore the PDU to Factory Default Settings (RS-232)

Connect an RS-232 cable between the SER MGT port and the host.

Configure the host's terminal or terminal emulator.
See Terminal Configuration Settings.

When prompted, log in as an admin user.
See Login Information.

After successful login, type.
```
pducli -> factory_default=yes
```

Copyright © 2009, 2016, Oracle and/or its affiliates. All rights reserved. Legal Notices