Rack Compatibility
The rackmount kit is compatible with equipment racks that meet the following standards.
|
|
Rack types when used with the CMA comb, part number 7069793
|
1000-mm and 1200-mm racks
|
Rack type when used with the multi-piece CMA, part number 7041990
|
1200-mm rack
|
Structure
|
Four-post rack (mounting at both front and rear). Two-post racks are not compatible.
|
Rack horizontal opening and unit vertical pitch
|
Conforms to ANSI/EIA 310-D-1992 or IEC 60927 standards.
|
Rack rail mounting hole sizes
|
9.5-mm square holes, M6 round mounting holes and 10-32 mounting holes are supported. All other
sizes, including 7.2-mm or M5 mounting holes, are not supported.
|
Distance between front and rear mounting planes
|
Minimum: 24 in. (240 mm)
Maximum: 36 in. (915 m)
|
Clearance depth in front of front mounting plane
|
Distance to front rack door is at least 1 in. (25.4 mm).
|
Clearance depth behind front mounting plane
|
Distance to rear rack door is at least 34.6 in. (878.8 mm) with the cable management arm, or
31.5 in. (800 mm) without the cable management arm.
|
Clearance width between front and rear mounting planes
|
Distance between structural supports and cable troughs is at least 18.9 in. (480 mm).
|
Server dimensions
|
Depth: 31.5 in. (800 mm)
Width: 17.5 in. (445 mm)
Height: 13.8 in. (350 mm)
|
|