plgrp - observe and affect home lgroup and lgroup affinities of threads
plgrp [-F] [-h] pid | core [/lwps] ...
plgrp [-F] -i pid[/lwps] ...
plgrp [-F] -a lgroup_list pid[/lwps] ...
plgrp [-F] [-I default | none |future] -H lgroup_list pid[/lwps] ...
plgrp [-F] [-I default | none |future] -H lgroup_list -e command [arguments]
plgrp [-F] [-I default | none | future] -A lgroup_list/none | weak | strong [,...] pid[/lwps] ...
plgrp [-F] [-I default | none | future] -A lgroup_list/none | weak |strong [,...] -e command [arguments]
plgrp [-F] -I default | none | future pid[/lwps]
plgrp [-F] -I default | none | future -e command [arguments] ...
plgrp displays or sets the home lgroup and lgroup affinities for one or more processes, threads, or LWPs.
An lgroup represents the set of CPU and memory-like hardware devices that are at most some distance (latency) apart from each other. Each lgroup in the system is identified by a unique lgroup ID. The lgroups are organized into a hierarchy to facilitate finding the nearest resources. See lgrpinfo(1) for more about lgroups and the lgroup hierarchy.
By default, each thread is assigned a home lgroup upon creation. When the system needs to allocate a CPU or memory resource for a thread, it searches the lgroup hierarchy from the thread's home lgroup for the nearest available resources to the thread's home.
Typically, the home lgroup for a thread is the lgroup for which the thread has the most affinity. Initially, the system chooses a home lgroup for each thread, but leaves the thread's affinity for that lgroup set to none. If a thread sets a stronger affinity for an lgroup in its processor set other than its home, the thread is rehomed to that lgroup as long as the thread is not bound to a CPU. The thread can be re-homed to the lgroup in its processor set with the next highest affinity when the affinity (if any) for its home lgroup is removed (set to none).
The different levels of lgroup affinities and their semantics are fully described in lgrp_affinity_set(3LGRP).
lgroup_list is a comma separated list of one or more of the following:
- lgroup_ID - Range of lgroup_IDs specified as <start lgroup_ID>-<end lgroup_ID> - all - root - leaves
The all keyword represents all lgroup IDs in the system. The root keyword represents the ID of the root lgroup. The leaves keyword represents the IDs of all leaf lgroups, that is, lgroups which do not have any children.
plgrp takes one or more space separated processes or threads as arguments. Processes and threads can be specified in a manner similiar to the proc(1) tools. A process ID can be specified as an integer pid or /proc/pid. Shell expansions can be used to specify processes when /proc/pid is used. For example, /proc/* can be used to specify all the processes in the system. If a process ID is given alone, then all the threads of the process are included as arguments to plgrp.
A thread can be explicitly specified with its process ID and thread ID given together as pid/lwpid. Multiple threads of a process can be selected at once by using the hyphen (-) and comma (,). For example, pid/1,2,7-9 specifies threads 1, 2, 7, 8, and 9 of the process with pid as its process ID.
The following options are supported:
Display lgroup affinities of specified processes or threads for the specified lgroup_list.
Set affinity of specified processes or threads for the specified lgroup_list.
A comma separated list of lgroups/affinity assignments can be given to set several affinities at once.
Force by grabbing the target process even if another process has control. Caution should be exercised when using the –F flag. Imposing two controlling processes on one victim process can lead to chaos. Safety is assured only when the primary controlling process (typically a debugger) has stopped the victim process, but isn't doing anything during the application of this proc tool. See WARNINGS for more details.
Create a new process, apply plgrp to that process, and execute the specified command and arguments.
Get home lgroup of specified processes and/or threads. If no options are specified, this is the default.
Set home lgroup of specified processes and threads.
This sets a strong affinity for the desired lgroup to re-home the threads. If more than one lgroup is specified, plgrp tries to home the threads to the lgroups in a round robin fashion.
Display lgroup affinity inheritance of the specified processes or threads.
Set lgroup affinity inheritance for the specified processes or threads.
The following operands are supported:
Specifies thread. See USAGE.
Specifies process ID. See USAGE.
The following example gets the home lgroup for the shell:
% plgrp $$ PID/LWPID HOME 3401/1 1Example 2 Setting the Home lgroup of Multiple Threads to the Root lgroup
The following example sets the home lgroup of multiple threads to the root lgroup:
% plgrp -H root `pgrep firefox` PID/LWPID HOME 918/1 1 => 0 934/1 2 => 0 934/2 1 => 0 934/3 2 => 0 934/625 1 => 0 934/626 2 => 0 934/624 2 => 0 934/623 2 => 0 934/630 1 => 0Example 3 Executing plgrp with Root lgroup as the Home lgroup of Multiple Threads
The following example executes firefox with root as the home lgroup of multiple threads:
% plgrp -H root -e /usr/bin/firefoxExample 4 Getting Two Threads' Affinities for lgroups 0-2
The following example gets two threads' affinities for lgroups 1–2:
% plgrp -a 0-2 101398/1 101337/1 PID/LWPID HOME AFFINITY 101398/1 1 0-2/none 101337/1 1 0-2/noneExample 5 Setting lgroup Affinities
The following example sets lgroup affinities:
% plgrp -A 0/weak,1/none,2/strong 101398 PID/LWPID HOME AFFINITY 101398/1 1 => 2 0,2/none => 2/strong,0/weak
The following exit values are returned:
Syntax error. Nothing was changed.
Non-fatal error or interrupt. Something might have changed.
See attributes(5) for descriptions of the following attributes:
The command syntax and output formats are Uncommitted.
lgrpinfo(1), madv.so.1(1), pmadvise(1), pmap(1), proc(1), ps(1), prstat(1M), lgrp_affinity_get(3LGRP), lgrp_affinity_set(3LGRP), lgrp_affinity_inherit_get(3LGRP), lgrp_affinity_inherit_set(3LGRP), lgrp_home(3LGRP), liblgrp(3LIB), proc(4), attributes(5)
Like the proc(1) tools, the plgrp utility stops its target processes while inspecting them and reports the results when invoked with any option.
There are conditions under which processes can deadlock. A process can do nothing while it is stopped. Stopping a heavily used process in a production environment (even for a short amount of time) can cause severe bottlenecks and even hangs of these processes, making them to be unavailable to users. Thus, stopping a UNIX process in a production environment should be avoided. See proc(1).
A process that is stopped by this tool might be identified by issuing the following command:
and looking for a T in the first column of the output. Certain processes, for example, sched, can show the T status by default most of the time.