Tcl_LimitAddHandler - Commands, Tcl_LimitGetGranularity, Tcl_LimitGetTime, Tcl_LimitReady, Tcl_LimitRemoveHandler, Tcl_LimitSetCommands, Tcl_LimitSetGranularity, Tcl_LimitSetTime, Tcl_LimitTypeEnabled, Tcl_LimitTypeExceeded, Tcl_LimitTypeReset, Tcl_LimitTypeSet - manage and check resource limits on interpreters
#include <tcl.h> int Tcl_LimitCheck(interp) int Tcl_LimitReady(interp) int Tcl_LimitExceeded(interp) int Tcl_LimitTypeExceeded(interp, type) int Tcl_LimitTypeEnabled(interp, type) void Tcl_LimitTypeSet(interp, type) void Tcl_LimitTypeReset(interp, type) int Tcl_LimitGetCommands(interp) void Tcl_LimitSetCommands(interp, commandLimit) void Tcl_LimitGetTime(interp, timeLimitPtr) void Tcl_LimitSetTime(interp, timeLimitPtr) int Tcl_LimitGetGranularity(interp, type) void Tcl_LimitSetGranularity(interp, type, granularity) void Tcl_LimitAddHandler(interp, type, handlerProc, clientData, deleteProc) void Tcl_LimitRemoveHandler(interp, type, handlerProc, clientData)
Tcl_LimitCheck(3tcl) Tcl Library Procedures Tcl_LimitCheck(3tcl)
______________________________________________________________________________
NAME
Tcl_LimitAddHandler, Tcl_LimitCheck, Tcl_LimitExceeded, Tcl_LimitGet-
Commands, Tcl_LimitGetGranularity, Tcl_LimitGetTime, Tcl_LimitReady,
Tcl_LimitRemoveHandler, Tcl_LimitSetCommands, Tcl_LimitSetGranularity,
Tcl_LimitSetTime, Tcl_LimitTypeEnabled, Tcl_LimitTypeExceeded,
Tcl_LimitTypeReset, Tcl_LimitTypeSet - manage and check resource limits
on interpreters
SYNOPSIS
#include <tcl.h>
int
Tcl_LimitCheck(interp)
int
Tcl_LimitReady(interp)
int
Tcl_LimitExceeded(interp)
int
Tcl_LimitTypeExceeded(interp, type)
int
Tcl_LimitTypeEnabled(interp, type)
void
Tcl_LimitTypeSet(interp, type)
void
Tcl_LimitTypeReset(interp, type)
int
Tcl_LimitGetCommands(interp)
void
Tcl_LimitSetCommands(interp, commandLimit)
void
Tcl_LimitGetTime(interp, timeLimitPtr)
void
Tcl_LimitSetTime(interp, timeLimitPtr)
int
Tcl_LimitGetGranularity(interp, type)
void
Tcl_LimitSetGranularity(interp, type, granularity)
void
Tcl_LimitAddHandler(interp, type, handlerProc, clientData, deleteProc)
void
Tcl_LimitRemoveHandler(interp, type, handlerProc, clientData)
ARGUMENTS
Tcl_Interp *interp (in) Interpreter that
the limit being
managed applies
to or that will
have its limits
checked.
int type (in) The type of limit
that the opera-
tion refers to.
This must be
either
TCL_LIMIT_COM-
MANDS or
TCL_LIMIT_TIME.
int commandLimit (in) The maximum num-
ber of commands
(as reported by
info cmdcount)
that may be exe-
cuted in the
interpreter.
Tcl_Time *timeLimitPtr (in/out) A pointer to a
structure that
will either have
the new time
limit read from
(Tcl_LimitSet-
Time) or the cur-
rent time limit
written to
(Tcl_LimitGet-
Time).
int granularity (in) Divisor that
indicates how
often a particu-
lar limit should
really be
checked. Must be
at least 1.
Tcl_LimitHandlerProc *handlerProc (in) Function to call
when a particular
limit is
exceeded. If the
handlerProc
removes or raises
the limit during
its processing,
the limited
interpreter will
be permitted to
continue to
process after the
handler returns.
Many handlers may
be attached to
the same inter-
preter limit;
their order of
execution is not
defined, and they
must be identi-
fied by handler-
Proc and client-
Data when they
are deleted.
ClientData clientData (in) Arbitrary
pointer-sized
word used to pass
some context to
the handlerProc
function.
Tcl_LimitHandlerDeleteProc *deleteProc (in) Function to call
whenever a han-
dler is deleted.
May be NULL if
the clientData
requires no dele-
tion.
______________________________________________________________________________
DESCRIPTION
Tcl's interpreter resource limit subsystem allows for close control
over how much computation time a script may use, and is useful for
cases where a program is divided into multiple pieces where some parts
are more trusted than others (e.g. web application servers).
Every interpreter may have a limit on the wall-time for execution, and
a limit on the number of commands that the interpreter may execute.
Since checking of these limits is potentially expensive (especially the
time limit), each limit also has a checking granularity, which is a
divisor for an internal count of the number of points in the core where
a check may be performed (which is immediately before executing a com-
mand and at an unspecified frequency between running commands, which
can happen in empty-bodied while loops).
The final component of the limit engine is a callback scheme which
allows for notifications of when a limit has been exceeded. These
callbacks can just provide logging, or may allocate more resources to
the interpreter to permit it to continue processing longer.
When a limit is exceeded (and the callbacks have run; the order of exe-
cution of the callbacks is unspecified) execution in the limited inter-
preter is stopped by raising an error and setting a flag that prevents
the catch command in that interpreter from trapping that error. It is
up to the context that started execution in that interpreter (typically
a master interpreter) to handle the error.
LIMIT CHECKING API
To check the resource limits for an interpreter, call Tcl_LimitCheck,
which returns TCL_OK if the limit was not exceeded (after processing
callbacks) and TCL_ERROR if the limit was exceeded (in which case an
error message is also placed in the interpreter result). That function
should only be called when Tcl_LimitReady returns non-zero so that
granularity policy is enforced. This API is designed to be similar in
usage to Tcl_AsyncReady and Tcl_AsyncInvoke.
When writing code that may behave like catch in respect of errors, you
should only trap an error if Tcl_LimitExceeded returns zero. If it
returns non-zero, the interpreter is in a limit-exceeded state and
errors should be allowed to propagate to the calling context. You can
also check whether a particular type of limit has been exceeded using
Tcl_LimitTypeExceeded.
LIMIT CONFIGURATION
To check whether a limit has been set (but not whether it has actually
been exceeded) on an interpreter, call Tcl_LimitTypeEnabled with the
type of limit you want to check. To enable a particular limit call
Tcl_LimitTypeSet, and to disable a limit call Tcl_LimitTypeReset.
The level of a command limit may be set using Tcl_LimitSetCommands, and
retrieved using Tcl_LimitGetCommands. Similarly for a time limit with
Tcl_LimitSetTime and Tcl_LimitGetTime respectively, but with that API
the time limit is copied from and to the Tcl_Time structure that the
timeLimitPtr argument points to.
The checking granularity for a particular limit may be set using
Tcl_LimitSetGranularity and retrieved using Tcl_LimitGetGranularity.
Note that granularities must always be positive.
LIMIT CALLBACKS
To add a handler callback to be invoked when a limit is exceeded, call
Tcl_LimitAddHandler. The handlerProc argument describes the function
that will actually be called; it should have the following prototype:
typedef void Tcl_LimitHandlerProc(
ClientData clientData,
Tcl_Interp *interp);
The clientData argument to the handler will be whatever is passed to
the clientData argument to Tcl_LimitAddHandler, and the interp is the
interpreter that had its limit exceeded.
The deleteProc argument to Tcl_LimitAddHandler is a function to call to
delete the clientData value. It may be TCL_STATIC or NULL if no dele-
tion action is necessary, or TCL_DYNAMIC if all that is necessary is to
free the structure with Tcl_Free. Otherwise, it should refer to a
function with the following prototype:
typedef void Tcl_LimitHandlerDeleteProc(
ClientData clientData);
A limit handler may be deleted using Tcl_LimitRemoveHandler; the han-
dler removed will be the first one found (out of the handlers added
with Tcl_LimitAddHandler) with exactly matching type, handlerProc and
clientData arguments. This function always invokes the deleteProc on
the clientData (unless the deleteProc was NULL or TCL_STATIC).
KEYWORDS
interpreter, resource, limit, commands, time, callback
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | runtime/tcl-8 |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from http://prdownloads.sourceforge.net/tcl/tcl-
core8.6.7-src.tar.gz.
Further information about this software can be found on the open source
community website at https://www.tcl.tk/.
Tcl 8.5 Tcl_LimitCheck(3tcl)