Power On a CMC

1. Identify the prerequisite and subsequent tasks you must perform in conjunction with this procedure, to achieve a goal.

   See the table in Servicing the CMCs.

2. Verify the firmware version with the clia version command.
3. If necessary, upgrade the firmware on the CMC.

   See Upgrading the Firmware.

4. Make the new CMC active with the clia switchover command.
5. Set the IP address for the new CMC with the clia setlanconfig command.
6. Add the users with the clia user add command.
7. Set the CMC’s name with the clia localaddress command.
8. (Optional) Display and record the CMC’s FRU ID information:

   # clia fruinfo IPMB_address 0

   where IPMB_address is from Component Addressing.

   The following example is the output for CMC 0:

   # clia fruinfo 10 0
   Pigeon Point Shelf Manager Command Line Interpreter
   10: FRU # 0, FRU Info
   Common Header:    Format Version = 1
   Board Info Area:
        Version     = 1
        Language Code            = 25
        Mfg Date/Time            = May 22 09:16:00 2009 (7042156 minutes since 1996)
        Board Manufacturer       = Sun Microsystems
        Board Product Name       = Sun Datacenter Switch DCS 648 - CMC board
        Board Serial Number      = 0110SJC-0911CM0001
        Board Part Number        = 541-3807-02
        FRU Programmer File ID   = M9_CMC_FRU_541-3807-02_0110SJC-0911CM0001.txt
   Product Info Area:
        Version     = 1
        Language Code            = 25
        Manufacturer Name        = Sun Microsystems
        Product Name             = Sun Datacenter Switch DCS 648 - CMC board
        Product Part / Model#    = 541-3807-02
        Product Version          = Rev 50
        Product Serial Number    = 0110SJC-0905CM0003
        Asset Tag                = none
        FRU Programmer File ID   = M9_CMC_FRU_541-3807-02_0110SJC-0911CM0001.txt
   Multi Record Area:
        PICMG Board Point-to-Point Connectivity Record (ID=0x14)
            Version = 0
        Record Type              = 0xc0 OEM Defined Record
            Version = 2
        PPS IPMB Topology Record (ID=0x05)
            Version = 0
   #

Related Information

• Switch Reference, version command

• Switch Reference, switchover command

• Switch Reference, setlanconfig command

• Switch Reference, user add command

• Switch Reference, localaddress command

• Power Off a CMC

• Power On a Power Supply

• Power On a Fabric Card

• Power On a Line Card