Go to main content

Oracle^® ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 4.0.x

Exit Print View

» ...Documentation Home » Oracle Integrated Lights Out Manager (ILOM) ... » Oracle^® ILOM User's Guide for ... » Troubleshooting Oracle ILOM Managed Devices » Enabling and Running Oracle ILOM Diagnostic Tools » Running the x86 HWDiag Tool within Oracle ILOM ...

Updated: September 2018

Oracle^® ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 4.0.x

Document Information

Using This Documentation

Oracle ILOM Overview

Getting Started With Oracle ILOM

Viewing System Inventory, Health, and Performing Service and Management Actions

Applying Host and System Management Actions

Real-Time Power Monitoring Through Oracle ILOM Interfaces

Troubleshooting Oracle ILOM Managed Devices

Network Connection Issues: Oracle ILOM Interfaces

Tools for Observing and Debugging System Behavior

Enabling and Running Oracle ILOM Diagnostic Tools

Enabling x86 Diagnostics to Run at Boot

Running the x86 HWDiag Tool within Oracle ILOM Diag Shell

Generating x86 Processor Interrupt: Debugging System Status

Enabling Diagnostics to Run at Boot on Legacy SPARC Servers (M6, M5, T5, and Earlier)

Enabling Diagnostics to Run at Boot on Newer SPARC Systems (M7 and T7 Servers)

Taking a Snapshot: Oracle ILOM SP State

Managing Oracle Hardware Faults Through the Oracle ILOM Fault Management Shell

Using the Command-Line Interface

Language:

Running the x86 HWDiag Tool within Oracle ILOM Diag Shell

The x86 HWdiag is a command-line utility that checks the status of a system and its components. You run the x86 HWdiag utility within the Oracle ILOM Diag shell.

Note - The x86 HWdiag utility is available for use only in Oracle ILOM 4.0.x and later releases.Check the x86 server product notes to see if this functionality is supported on your platform.

To run the x86 HWDiag tool, see the following procedure:

Copyright © 2018, Oracle and/or its affiliates. All rights reserved.