|
|
|
Event ID |
Unique number used to identify
the encountered event. |
System Log
Event Log
Audit Log |
Date and Time |
Day and time the event occurred.
If the Network Time Protocol (NTP) server is enabled to set the Oracle
ILOM time, the Oracle ILOM clock uses Universal Coordinated Time
(UTC).
|
System Log
Event Log
Audit Log |
Event Type or Type |
Hardware dependent event
property.
Event type examples:
|
System Log
Event Log
Audit Log |
Subsystem |
Hardware dependent property
that identifies the subsystem where the event was encountered.
Subsystem examples:
System
Power
Cooling
Memory
Storage
I/O module
Processor
Blade
DCU
Firmware
|
|
Component |
Hardware dependent property
that identifies the component where the event was encountered.
Component examples:
BLn (Blade n)
Hostn
/SYS (Host System)
CMUn (Processor Board n)
DCUn
PSn (Power Supply n)
Fann (Fan n)
Diskn
ILOM
|
|
Class |
Hardware dependent property
that identifies the event class.
Class examples:
Audit/
Log – For commands that result in a configuration
change. Description includes user, command, command parameters,
and success/failure.
IPMI/Log – For any event that is recorded in the IPMI
SEL is also put in the management log.
Chassis/State – For
changes to the inventory and general system state.
Chassis/Action – For
shutdown events for server module/chassis, hot insert/removal of
FRU components, as well as Reset Parameters button when pushed.
Fault/Fault – Description
gives the time fault was detected and the suspect component name.
Fault/Repair – For
Fault Management repairs. Description gives component name.
|
|
Severity |
Severity level of the event.
Severity examples:
Debug
Down
Critical
Major
Minor
|
|