Record the MAC IDs

1. Identify the prerequisite and subsequent installation tasks that you must perform in conjunction with this task.

   See Installation Task Overview.

2. Remove the Customer Information sheet from the outside of the shipping carton.
3. On the Customer Information sheet, find the switch serial number.
4. Record the serial number to a document intended for this purpose.
5. In the Network Interfaces table of the sheet, find the primary MAC ID.

   This is the MAC ID of the SP within the switch.

6. Record the SP MAC ID to the document.
7. In the Network Interfaces table of the sheet, find the secondary MAC ID.

   This is the MAC ID of the SCP within the switch.

8. Record the SCP MAC ID to the document.
9. Secure the Customer Information sheet in a safe place.
10. Consider your next steps.
    • If you will assign IP addresses to the SP and SCP through DHCP, configure your DHCP server now.

      See Assign IP Addresses to the SP and SCP Through DHCP.

    • If you will assign static IP addresses to the SP and SCP through the SER MGT port, go to Handling Precautions.

Related Information

• Shipping Kit

• Assign IP Addresses to the SP and SCP Through DHCP

• Handling Precautions

• ESD Precautions

• Installation Tools