Verify That the Switch Is Operational

Language:

Identify the prerequisite and subsequent installation tasks that you must perform in conjunction with this task.
See Installation Task Overview.

Access the Oracle ILOM CLI.
See Log In to the SP (SER MGT) or Log In to the SP (Network Management).

Display the installed I/O modules.

-> show /SYS -t fru_description
Target                        | Property               | Value
------------------------------+------------------------+--------------------
/SYS/MB                       | fru_description        | PCBA,NM3 F2-12,Management Board.
/SYS/MODULES/MODULE0          | fru_description        | PCBA,40GE/4x10GE,IO MODULE
/SYS/MODULES/MODULE1          | fru_description        | PCBA,40GE/4x10GE,IO MODULE
/SYS/MODULES/MODULE3          | fru_description        | PCBA,16GB FC,IO MODULE
/SYS/MODULES/MODULE4          | fru_description        | PCBA,16GB FC,IO MODULE
/SYS/MODULES/MODULE6          | fru_description        | PCBA,IB LR,IO MODULE
/SYS/MODULES/MODULE7          | fru_description        | PCBA,IB LR,IO MODULE
/SYS/MODULES/MODULE9          | fru_description        | PCBA,10GBASE-T,IO MODULE
/SYS/MODULES/MODULE10         | fru_description        | PCBA,10GBASE-T,IO MODULE
/SYS/PS0                      | fru_description        | A261_POWER_SUPPLY
/SYS/PS1                      | fru_description        | A261_POWER_SUPPLY
/SYS/SP                       | fru_description        | PCA,PILOT3 SP, OPUS

->

Note - If an I/O module is not installed in a slot, that slot is not reported.

Check the health of the switch.

-> show /System -t health
Target                                       | Property  | Value
---------------------------------------------+-----------+-------
/System                                      | health    | OK
/System/Power                                | health    | OK
/System/Power/Power_Supplies/Power_Supply_0  | health    | OK
/System/Power/Power_Supplies/Power_Supply_1  | health    | OK
/System/Cooling                              | health    | OK
/System/Cooling/Fans/Fan_0                   | health    | OK
/System/Cooling/Fans/Fan_1                   | health    | OK
/System/Cooling/Fans/Fan_2                   | health    | OK
/System/Cooling/Fans/Fan_3                   | health    | OK
/System/Cooling/Fans/Fan_4                   | health    | OK
/System/Cooling/Fans/Fan_5                   | health    | OK
/System/Cooling/Fans/Fan_6                   | health    | OK
/System/Cooling/Fans/Fan_7                   | health    | OK
/System/Networking                           | health    | OK
/System/Networking/Switches/Switch_0         | health    | OK
/System/Networking/Switches/Switch_1         | health    | OK
/System/Networking/Modules/Module_0          | health    | OK
/System/Networking/Modules/Module_1          | health    | OK
/System/Networking/Modules/Module_3          | health    | OK
/System/Networking/Modules/Module_4          | health    | OK
/System/Networking/Modules/Module_6          | health    | OK
/System/Networking/Modules/Module_7          | health    | OK
/System/Networking/Modules/Module_9          | health    | OK
/System/Networking/Modules/Module_10         | health    | OK

->

Note - If an I/O module is not installed in a slot, that slot is not reported.

If any target has a health value other than OK, investigate why.
Refer to detecting and managing faults in the Oracle Fabric Interconnect F2-12 Service Manual.

Identify any open problems.

-> show /System/Open_Problems
Open Problems (0)
Date/Time                 Subsystems          Component
------------------------  ------------------  ------------
->

If any open problems are discovered, investigate the problem.
Refer to detecting and managing faults in the Oracle Fabric Interconnect F2-12 Service Manual.

Verify the switch's connectivity.
See Verify Connectivity.

Verify That the Switch Is Operational

Related Information