Log In to the SP (Network Management)

1. Identify the prerequisite and subsequent installation tasks that you must perform in conjunction with this task.

   See Installation Task Overview.

2. Open an SSH session and connect to the SP by specifying the IP address you previously configured.

   For example, type:

   % ssh -l root IP_address
   password: password
   ->

   where IP_address is the IP address of the SP. Initially, the password is changeme.

   ---

   Note -  You can change the password at a later time. Refer to the Oracle EDR InfiniBand Switch and Virtualized I/O System Administration Guide, changing the root user password for instructions.

   ---

   The Oracle ILOM shell prompt (->) is displayed.

3. Verify switch functionality.

   See Verify LED Status.

Related Information

• Connect the SER MGT Cable

• Connect a Serial Management Device to the SER MGT Port

• Connect Power Cords

• Power On the Switch

• Log In to the SP (SER MGT)

• Assign a Static IP Address to the SP

• Assign a Static IP Address to the SCP