Supported
Configurations, Operating Systems, and Required Patches
This table lists the server modules (blades) and FEMs that
are supported in a Sun Blade 6000 modular system or Sun Netra 6000
modular system chassis.
Note - In these product notes, the term "modular system" refers
to both the Sun Blade 6000 modular system chassis and the Sun Netra
6000 modular system chassis.
|
|
|
Sun Blade X6275 M2 10GbE |
Built in Mellanox ConnectX-2 controller |
Open
Solaris 10 08/11 SLES 10 SP3 (64 bit only) SLES 11 SP1 (64 bit only) Microsoft Windows server 2008 R2
Note - A server-specific driver available on the server tools
and drivers ISO image or the Mellanox web site is required for 10GbE support. |
Sun Blade X6270 |
Sun Dual 10GbE PCIe 2.0 |
Oracle
Solaris 10 10/09 (with ixgbe driver patches
143355-03 and 143354-03 or later) and Oracle Solaris 10 5/09 OpenSolaris 2009.06 Windows 2008 32/64 bit, Windows Server 2008 R2,
and Windows 2003 32/64 bit VMware ESX 4.0 and VMware ESX 3.5 RHEL 5.3 32/64 bit and RHEL 4.8 32/64 bit SLES 11 32/64 bit, SLES 10 SP3 64 bit, and SLES
9 SP5 64 bit
|
Sun Blade T6340 |
Sun Dual 10GbE PCIe 2.0 |
|
Sun Blade T6320 |
Sun Dual 10GbE PCIe 2.0 |
|
Sun Blade T6320 |
Sun Dual 10-GbE XAUI Pass-Thru |
|
|
Note - When using the Sun Blade T6320 server module with the
Sun Dual 10-GbE XAUI Pass-Thru FEM and the Sun Blade 6000 Ethernet
Switched NEM 24p 10GbE, firmware 7.2.5 or later is required to enable
network booting. Refer to the Sun Blade T6320
G2 and Sun Blade T6320 Server Modules Product Notes for
details.
Download and unzip the patches from https://support.oracle.com. Install
the patches using the directions provided in the associated README
files.