Minimum Required Software - Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes

Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes

Exit Print View

» ...Documentation Home » Sun Blade 6000 Ethernet Switched Network ... » Sun Blade 6000 Ethernet Switched NEM 24p 10GbE ... » Sun Blade 6000 Ethernet Switched NEM 24p 10GbE ... » Enabling SAS2 Functionality » Minimum Required Software

Updated: March 2016

Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes

Document Information

Using This Documentation

Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes

NEM Documentation Reading Order

Introducing What's New in Release 1.2

IPv6 Switching and Routing

PVRST+ Protocol

Server Load Balancer

Oracle ILOM 3.0 Features

Updates to 1.2 Release From Patch Update

Supported Configurations, Operating Systems, and Required Patches

Required Firmware and Kernel Drivers

Modular System Limitations

Enabling SAS2 Functionality

Important Firmware Upgrade Before Mixing SAS1 and SAS2 Components

Supported Server Modules and REMs

Minimum Required Software

Sun Blade ZoneManager

Upgrading the NEM Firmware

Back Up the Current Configuration Before Upgrading

Download the NEM Firmware Package

Upgrade the NEM Firmware

Enable or Disable SAS2 From Oracle ILOM

Configure 1Gbps Mode on SFP+ Interfaces

Fine Tune the VLAN Setup

Managing SEFOS Configurations

Include the SEFOS Configuration in Backups

Restore the Configuration

Configuring TACACS+

TACACS+ Properties

Configure TACACS+ Settings

Issues Corrected in the Patch Update

Issues Corrected in Prior Updates

SLB-L2 Error is Seen When Reassigning a Port From One LBG Group to Another (7100720)

SLB Must Not Allow Different VLANs in the Same Group (7095155)

SLB L2 Cannot Create More Than Two Groups, SLB L2 Limits to Two LBGs (7092380)

Manually Deleting Static Route Does Not Affect the Corresponding SLB Entry (7064092)

Changing the Default Value for default-vlan-id Could Result in VLAN Misconfiguration (7015004)

Some of the IGMP Conformance Results Don't Match Expectations (7006297 and 6997415)

Ports Lock and Corresponding LEDs Stay Lit or NEM Fails to Power On After Doing Consecutive Hardware Resets (6992127)

QoS - set algo-type tailDrop queue-drop-algo Does Not Work (6991230)

Packets Might Be Dropped When Using Q-in-Q Interop in Certain Configurations (6989048)

The no default-metric [,short(1-16)>] Command Does Not Work as Documented (6987482)

CMM Reports SAS2 on the NEM as Faulty if SAS2 Is Not Enabled (6977266)

Using vlan 1 as Shown in Various Examples in the Documentation Generates Error Codes (6968484)

When Multiple Configuration Scripts Are Run in Parallel, SEFOS Application Can Crash (6936742)

Unlit Link and Activity LEDs for the SFP+ Ports (6873825)

The switch Command Line Option Is Unsupported

SSL V3.0 POODLE DISABLE SSL V3 (19842641)

Language:

Minimum Required Software

This table lists minimum software versions are required to use SAS-2 with the NEM.

Component	Software Version
CMM	v3.0.10.15.b r57573
Sun Blade Storage Module M2	5.3.7
Sun Blade Server X6270 M2SP	v3.0.14.12 r58608
SG-SAS6-REM-Z	MPT firmware: 5.00.17.00-IR NVDATA: 05.02.00.14 Util version: 7.05.05.00 (2010.05.19)
G(X)-SAS6-R-REM-Z	Firmware: 2.120.63-1242 Utility version: 7.05.05.00 (2010.05.19) Firmware and drivers can be downloaded from: http://www.lsi.com/sep/Pages/oracle/sg_x_sas6-r-rem-z.aspx

Copyright © 2010, 2015, 2016, Oracle and/or its affiliates. All rights reserved. Legal Notices