Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes

Exit Print View

Updated: March 2016

Ports Lock and Corresponding LEDs Stay Lit or NEM Fails to Power On After Doing Consecutive Hardware Resets (6992127)

Workaround: In the unlikely event that the NEM's switch ports lock upon consecutive hardware resets through CMM, complete these steps:

  1. Power off the NEM from CMM: stop /CH/NEMx.

  2. Wait five minutes while the capacitance discharges and power the NEM back on: start /CH/NEMx

  3. Remove the NEM, wait five minutes while the capacitance discharges, and reinstall the NEM in the chassis.