Oracle^® x86 Servers Diagnostics and Troubleshooting Guide

View System-Level Information and Health Status (CLI)

You can view the host system-level health status properties from the command-line interface (CLI) under the /System target.

• To collect system-level information or to verify the system health status, type show /System.

  For example:

      Properties:
          health = OK
          health_details = -
          open_problems_count = 0
          type = Rack Mount
          model = ORACLE SERVER X8-2
          qpart_id = Q13015
          part_number = 7336847-B2
          serial_number = 1715XC4010A
          rfid_serial_number = changeme
          system_identifier = (none)
          system_fw_version = 5.0.0.21
          primary_operating_system = Not Available
          primary_operating_system_detail = Comprehensive System monitoring is not available. Ensure the host is running with the Hardware Management
                                            Pack. For details go to http://www.oracle.com/goto/ilom-redirect/hmp
          host_primary_mac_address = 00:10:e0:b5:df:ba
          ilom_address = 10.129.129.183
          ilom_mac_address = 00:10:E0:B5:DF:BE
          locator_indicator = Off
          power_state = Off
          actual_power_consumption = 66 watts
          action = (Cannot show property)
  

  ---

  Note -  The property value for the primary operating system installed on the managed device is shown only when the Oracle ILOM Hardware Management Pack is installed on the managed device.

  ---