| Skip Navigation Links | |
| Exit Print View | |
|
Sun Datacenter InfiniBand Switch 36 HTML Document Collection for Firmware Version 2.0 |
Network Management Connector and Pins
USB Management Connector and Pins
Preparing to Install the Switch
Suggested Tools for Installation
Antistatic Precautions for Installation
Verify Shipping Carton Contents
Install the Switch in the Rack
Verifying the InfiniBand Fabric
Understanding Routing Through the Switch
Understanding Administrative Commands
Administering the I4 Switch Chip
Controlling the I4 Switch Chip
Administering the Subnet Manager
Controlling the Subnet Manager
Administering the InfiniBand Fabric
Monitoring the InfiniBand Fabric
Controlling the InfiniBand Fabric
Configuring the Fabric Director Node List
Partitioning the InfiniBand Fabric
Understanding Oracle ILOM on the Switch
Understanding Oracle ILOM Targets
Installing the Oracle ILOM Firmware
Acquire the Oracle ILOM Firmware Version 1.1.3
Install the Oracle ILOM Firmware Version 1.1.3
Administering Oracle ILOM (CLI)
Accessing Oracle ILOM From the CLI
Switching Between the Oracle ILOM Shell and the Linux Shell
Monitoring Oracle ILOM Targets (CLI)
Controlling Oracle ILOM Targets (CLI)
Upgrading the Switch Firmware Through Oracle ILOM (CLI)
Administering Oracle ILOM (Web)
Access Oracle ILOM From the Web Interface
Monitoring Oracle ILOM Targets (Web)
Controlling Oracle ILOM Targets (Web)
Upgrade the Switch Firmware (Web)
Accessing the Rear Panel Diagram
Accessing Status Pane Information
Monitoring Parameters and Status
Administering Oracle ILOM (SNMP)
Monitoring Oracle ILOM Targets (SNMP)
Controlling Oracle ILOM Targets (SNMP)
Display the Sensor States (IPMI)
Display the Sensor Information (IPMI)
Display the System Event Log (IPMI)
Display FRU ID Information (IPMI)
Display Switch Status LED States (IPMI)
Disable the Locator LED (IPMI)
Understanding Oracle ILOM Commands
Understanding Service Procedures
Antistatic Precautions for Service
Remove the Switch From the Rack
Understanding Hardware Commands
Linux Shells for Hardware Commands
Understanding InfiniBand Commands
Linux Shells for InfiniBand Commands
Understanding the SUN-DCS-IB-MIB MIB OIDs
Understanding the SUN-FABRIC-MIB MIB OIDs
Understanding the SUN-HW-TRAP-MIB MIB OIDs
Understanding the SUN-ILOM-CONTROL-MIB MIB OIDs
Understanding the SUN-PLATFORM-MIB MIB OIDs
Determine Partitions and P_Keys
Identify the Data Cable
Create a User Partition
Display the InfiniBand Fabric Partition Configuration
Determine Partitions and P_Keys
Add or Remove a Port From a Partition
Delete a Partition
Remove User Partitions for Firmware Downgrades
Partitioning the InfiniBand Fabric
Modify a Partition or Port
Add or Remove a Port From a Partition
Create a User Partition
Performing Daily Tasks (CLI)
Performing General Tasks on Oracle ILOM Targets (CLI)
Performing Oracle ILOM User Tasks (CLI)
Performing Daily Tasks (SNMP)
Performing General Tasks (SNMP)
Performing User Tasks (SNMP)
Performing Daily Tasks (Web)
Performing General Tasks on Oracle ILOM Targets (Web)
Performing Oracle ILOM User Tasks (Web)
Enable Alerts to Send PETs (CLI)
Enable Alerts to Send PETs (SNMP)
Enable Alerts to Send PETs (Web)
Physical Specifications
Find 1x, SDR, or DDR Links in the Fabric
Disable a Port
Enable a Port
Display Low-Level Detailed Information About a Port
Reset a Port
Set Port Speed
Display Switch Chip Port Status
Attach the Power Cords
Power Cord Requirements
Check Power Supply Status LEDs
Display Power Supply Status
Identify the Power Supply
Display Power Supply FRU ID
Inspecting a Power Supply
Inspect the Power Supply Connectors
Inspect the Power Supply Hardware
Install a Power Supply
Front Status LEDs
Power Off a Power Supply
Power On a Power Supply
Remove a Power Supply
Servicing Power Supplies
Power Off a Power Supply
Power Off a Power Supply
Power On a Power Supply
Powering On the Switch
Installation Preparation
Switch Hardware Problems
InfiniBand Fabric Problems