SPARC T5-4 Server Service Manual

Determine if the Service Processor Card Is Faulty

The following LEDs are illuminated when a SP fault is detected:

• System Service Required LEDs on the front panel and rear I/O module

• Server SP LED on the main module or rear I/O module

1. Determine if the System Service Required LEDs are illuminated on the front panel or the rear I/O module.

   See Interpreting LEDs.

2. Check the SP LED on the main module or the rear I/O module to determine if the service processor card needs to be replaced.

   See Main Module LEDs or Rear Panel Controls and LEDs. The SP LED is illuminated amber if the service processor card needs to be replaced.

3. Remove the faulty service processor card.

   See Remove the Service Processor Card.

Related Information

• Remove the Service Processor Card

• Install the Service Processor Card

• Verify the Service Processor Card