SPARC T5-4 Server Service Manual

Verify a Fan Module

1. Ensure that you have completed the following:

   • Applied power to the server.

     See Connect Power Cords.

   • Powered on the server.

     See Power On the Server (Oracle ILOM).

2. Check the front or rear panel LEDs for the following:

   • Green System OK LED – lit

   • Amber System Fault LED – not lit

   • Amber System Fan Fault LED – not lit

   See Front Panel Controls and LEDs and Rear Panel Controls and LEDs.

   If these conditions are met, continue to Step 5.

   If these conditions are not met, perform the actions described in Diagnostics Process.

3. Log in to Oracle ILOM.

   See Log In to Oracle ILOM (Service).

4. Start the faultmgmt shell.

   -> start SP/faultmgmt/shell
   Are you sure you want to start the faultmgmt shell (y/n)? y
    
   faultmgmtsp>
   

5. Use the fmadm faulty command to check for faults.

   • If faults are reported, see Diagnostics Process.

   • If no faults are reported, then the fan module has been replaced successfully.

Related Information

• Determine Which Fan Module Is Faulty

• Remove a Fan Module

• Install a Fan Module