Go to main content

SPARC T5-4 Server Service Manual

Exit Print View

Updated: February 2019
 
 

PCIe Carrier Handle and LEDs

image:Graphic showing the PCIe carrier LEDs.
No.
Button/LED
Icon
Description
1
Card carrier handle
2
Attention Required button
ATTN
Press this button to bring the PCIe card offline.
Press this button again to bring the PCIe card online.
3
OK (green)
image:PCIe card OK Icon
Indicates the following conditions:

  • Off – The server is powered off, or the PCIe card is not operating. You can remove the PCIe card, or install a new card.

  • On – The PCIe card is connected and online. Do not insert or remove the card.

  • Blinking – The PCIe card is powering up or powering down. Do not insert or remove the card.
4
Service Required (amber)
image:caution and locator icons
The Service Required LED indicates the following conditions:

  • Off – No fault is detected.

  • On – A fault has been detected.
Note - If a PCIe card fails and you do not have a replacement available, leave the failed PCIe card and carrier installed to ensure proper airflow in the server.

Related Information

Copyright © 2013, 2019, Oracle and/or its affiliates. All rights reserved. 
Previous
Next