SPARC T5-4 Server Service Manual

Verify the Service Processor Card

1. Verify that the SP LED on the main module or rear I/O module is lit green.

   See Main Module LEDs or Rear I/O Module LEDs.

2. Verify that the front and rear Service Required LEDs are not lit.

   See Interpreting LEDs.

3. Perform one of the following tasks based on your verification results:

   • If the previous steps did not clear the fault, see Diagnostics Process.

   • If the previous steps indicate that no faults have been detected, then the service processor card has been replaced successfully. No further action is required.

Related Information

• Determine if the Service Processor Card Is Faulty

• Remove the Service Processor Card

• Install the Service Processor Card