ibcheckportstate - man pages section 1M: System Administration Commands

Language:

ibcheckportstate (1m)

Name

ibcheckportstate - validate IB port for LinkUp and not Active state

Synopsis

ibcheckportstate [-h] [-v] [-N | -nocolor] [-G] [-C ca_name]
[-P ca_port] [-t(imeout) timeout_ms] <lid|guid> <port>

Description




OpenIB Diagnostics                           IBCHECKPORTSTATE(1m)



NAME
     ibcheckportstate  -  validate  IB  port  for  LinkUp and not
     Active state


SYNOPSIS
     ibcheckportstate [-h] [-v] [-N | -nocolor] [-G] [-C ca_name]
     [-P ca_port] [-t(imeout) timeout_ms] <lid|guid> <port>


DESCRIPTION
     Check  connectivity  and check the specified port for proper
     port state (Active) and port physical state (LinkUp).   Port
     address  is a lid unless -G option is used to specify a GUID
     address.


OPTIONS
     -G      use GUID address argument. In most cases, it is  the
     Port GUID.
             Example:
             "0x08f1040023"

     -v      increase the verbosity level

     -N | -nocolor use mono rather than color mode

     -C <ca_name>    use the specified ca_name.

     -P <ca_port>    use the specified ca_port.

     -t   <timeout_ms>  override  the  default  timeout  for  the
     solicited mads.


EXAMPLE
     ibcheckportstate 2 3         # check lid 2 port 3



ATTRIBUTES
     See  attributes(5)  for  descriptions   of   the   following
     attributes:

     +---------------+----------------------+
     |ATTRIBUTE TYPE |   ATTRIBUTE VALUE    |
     +---------------+----------------------+
     |Availability   | network/open-fabrics |
     +---------------+----------------------+
     |Stability      | Volatile             |
     +---------------+----------------------+




OpenIB              Last change: May 21, 2007                   1






OpenIB Diagnostics                           IBCHECKPORTSTATE(1m)



SEE ALSO
     smpquery(1m), ibaddr(1m)


AUTHOR
     Hal Rosenstock
          <halr@voltaire.com>



NOTES
     This   software   was   built   from   source  available  at
     https://java.net/projects/solaris-userland.   The   original
     community  source was downloaded from  ['http://www.openfab-
     rics.org/downloads/ibutils/ibutils-1.5.7.tar.gz',
     'http://www.openfabrics.org/downloads/libibverbs/libib-
     verbs-1.1.4-1.22.g7257cd3.tar.gz',      'http://www.openfab-
     rics.org/down-
     loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz',
     'http://www.openfabrics.org/downloads/libsdp/lib-
     sdp-1.1.108-0.15.gd7fdb72.tar.gz',      'http://www.openfab-
     rics.org/downloads/management/infiniband-
     diags-1.5.8.tar.gz',       'http://www.openfabrics.org/down-
     loads/management/libibmad-1.3.7.tar.gz',   'http://www.open-
     fabrics.org/downloads/management/libibumad-1.3.7.tar.gz',
     'http://www.openfabrics.org/downloads/manage-
     ment/opensm-3.3.9.tar.gz', 'http://www.openfabrics.org/down-
     loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
     'http://www.openfabrics.org/down-
     loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz',
     'http://www.openfabrics.org/downloads/rdmacm/librd-
     macm-1.0.14.1.tar.gz',     'http://www.openfabrics.org/down-
     loads/rds-tools/rds-tools-2.0.4.tar.gz']

     Further information about this software can be found on  the
     open   source   community   website  at  http://www.openfab-
     rics.org/.


















OpenIB              Last change: May 21, 2007                   2