Chapter 1 Application Network Manager

Table of Contents

1.1 Application Network Manager

1.1.1 Introduction to Application Network Manager
1.1.2 Requirements
1.1.3 Login to App Net Manager
1.1.4 Interface
1.1.5 Saving Your Changes

1.2 Define and Provision Service Policies

1.3 Accessing the Location Form

1.4 Location

1.4.1 Location
1.4.2 Change the Location
1.4.3 Require Administrator Approval for Partner Connections
1.4.4 Choose a Maintenance Time
1.4.5 Enable Remote Logging (System Logging)
1.4.6 Enable Redundant Hardware Configuration (Hardware Failover)
1.4.7 Enable Zero Touch Installation
1.4.8 Disable Advanced Performance Tuning

1.5 Network

1.5.1 Network
1.5.2 Modify Network Interfaces
1.5.3 Enable DHCP Server for LAN
1.5.4 Enable Location Gateway as Backhaul Server or Client
1.5.5 Enable RIPv2, OSPF, and/or BGP
1.5.6 WAN Interface Mismatch
1.5.7 Other Settings on the Network Tab

1.6 Applications

1.6.1 Add a New Application for Sharing and Monitoring

1.7 Monitored Servers

1.7.1 Requirements
1.7.2 Configure and Download the SNMP Extension Agent
1.7.3 Configure Server Monitoring
1.7.4 Add a New Server for Monitoring

1.8 User Groups

1.8.1 Create the Default User Group
1.8.2 Create the Internal Network Description Group
1.8.3 Create Named User Groups
1.8.4 Other User Groups

1.10 Partners

1.12 User Remote Access

1.13 High Availability

1.14 Alerts

1.15 DNS Server

In the I. Corente Services Planning manual and II A. Corente Virtual Services Gateway Hardware Preparation and Deployment manual, the steps to plan, procure, and set up your initial Corente Virtual Services Gateways were explained. This section describes the next step in the installation process, which is to define and provision the service policies for each of your Location gateways using the Application Network Manager (App Net Manager) application.