How to Put a Device Group in Maintenance State

Language:

Putting a device group in maintenance state prevents that device group from automatically being brought online whenever one of its devices is accessed. You should put a device group in maintenance state when completing repair procedures that require that all I/O activity be quiesced until completion of the repair. Putting a device group in maintenance state also helps prevent data loss by ensuring that a device group is not brought online on one node while the disk set is being repaired on another node.

For instructions on how to restore a corrupted diskset, see Restoring a Corrupted Disk Set.

Note - Before a device group can be placed in maintenance state, all access to its devices must be stopped, and all dependent file systems must be unmounted.

The phys-schost# prompt reflects a global-cluster prompt. Perform this procedure on a global cluster.

This procedure provides the long forms of the Oracle Solaris Cluster commands. Most commands also have short forms. Except for the long and short forms of the command names, the commands are identical.

Note - You can also take an active device group offline by using the Oracle Solaris Cluster Manager browser interface. See the Oracle Solaris Cluster Manager online help for more information. For Oracle Solaris Cluster Manager log-in instructions, see How to Access Oracle Solaris Cluster Manager.

Place the device group in maintenance state.
1. If the device group is enabled, disable the device group.
```
# cldevicegroup disable devicegroup
```
2. Take the device group offline.
```
# cldevicegroup offline devicegroup
```

If the repair procedure being performed requires ownership of a disk set, manually import that disk set.

# metaset -C take -f -s diskset

Caution - If you are taking ownership of a Solaris Volume Manager disk set, you must use the metaset -C take command when the device group is in maintenance state. Using metaset -t brings the device group online as part of taking ownership.

Complete the repair procedure that you need to perform.

Release ownership of the disk set.

Caution - Before taking the device group out of maintenance state, you must release ownership of the disk set. Failure to release ownership can result in data loss.

# metaset -C release -s diskset

Bring the device group online.

# cldevicegroup online devicegroup
# cldevicegroup enable devicegroup

Example 40 Putting a Device Group in Maintenance State

This example shows how to put device group dg-schost-1 in maintenance state, and remove the device group from maintenance state.

[Place the device group in maintenance state.]
# cldevicegroup disable dg-schost-1
# cldevicegroup offline dg-schost-1 
[If needed, manually import the disk set.]
For Solaris Volume Manager:
# metaset -C take -f -s dg-schost-1
[Complete all necessary repair procedures.]
[Release ownership.]
For Solaris Volume Manager:
# metaset -C release -s dg-schost-1
[Bring the device group online.]
# cldevicegroup online dg-schost-1
# cldevicegroup enable dg-schost-1