Go to main content

Administering an Oracle® Solaris Cluster 4.4 Configuration

Exit Print View

Updated: November 2019

How to Unmonitor a Disk Path

Use this procedure to unmonitor a disk path.

The phys-schost# prompt reflects a global-cluster prompt. Perform this procedure on a global cluster.

This procedure provides the long forms of the Oracle Solaris Cluster commands. Most commands also have short forms. Except for the long and short forms of the command names, the commands are identical.

Note -  You can also disable monitoring of a disk path by using the Oracle Solaris Cluster Manager browser interface. For Oracle Solaris Cluster Manager log-in instructions, see How to Access Oracle Solaris Cluster Manager.
  1. Assume the root role or a role that provides solaris.cluster.modify authorization on any node in the cluster.
  2. Determine the state of the disk path to unmonitor.
    # cldevice status device
  3. On each node, unmonitor the appropriate disk paths.
    # cldevice unmonitor -n node disk
Example 49  Unmonitoring a Disk Path

The following example unmonitors the schost-2:/dev/did/rdsk/d1 disk path and prints disk paths with status for the entire cluster.

# cldevice unmonitor -n schost2 /dev/did/rdsk/d1
# cldevice status -n schost2 /dev/did/rdsk/d1

Device Instance              Node               Status
---------------              ----               ------
/dev/did/rdsk/d1   schost-2   Unmonitored