Switched NEM Features Overview
Installing or Replacing the Switched NEM
Verifying the Switched NEM Installation
Verify Installation With the CMM ILOM Web Interface
Verify Installation With the CMM ILOM CLI
Finish the Switched NEM Installation
Install the Fabric Expansion Module in the Server Blade
Installing or Removing SFP+ or QSFP Optical Transceiver Modules
Install an SFP+ or QSFP Optical Transceiver Module
Remove an SFP+ or QFSP Optical Transceiver Module
Managing the NEM Remotely (ILOM)
Configuring an Externally Accessible IP Address on the NEM
Connecting to the NEM ILOM Through the CMM ILOM
Configure SEFOS User Privileges
Special Considerations for RADIUS Users
Configure User Privileges for RADIUS Users
Backing Up and Restoring the ILOM and SEFOS Configuration
The Sun Blade 6000 Ethernet Switched NEM 24p 10GbE is a multipurpose connectivity module for the Sun Blade 6000 modular system. The Switched NEM supports connection to external devices through 10GbE SFP+ ports and QSFP ports. The Switched NEM connects server modules (blades) in a Sun Blade 6000 modular system chassis with disk modules in the same chassis.
These topics describe the Switched NEM: