Understanding the Switched NEM
Switched NEM Features Overview
Verifying the Switched NEM Installation
Verify Installation With the CMM ILOM Web Interface
Verify Installation With the CMM ILOM CLI
Finish the Switched NEM Installation
Install the Fabric Expansion Module in the Server Blade
Installing or Removing SFP+ or QSFP Optical Transceiver Modules
Install an SFP+ or QSFP Optical Transceiver Module
Remove an SFP+ or QFSP Optical Transceiver Module
Managing the NEM Remotely (ILOM)
Configuring an Externally Accessible IP Address on the NEM
Connecting to the NEM ILOM Through the CMM ILOM
Configure SEFOS User Privileges
Special Considerations for RADIUS Users
Configure User Privileges for RADIUS Users
Backing Up and Restoring the ILOM and SEFOS Configuration
These topics describe how to replace a Sun Blade 6000 Ethernet Switched NEM 24p 10GbE in a powered-on Sun Blade 6000 Series chassis.
Caution - Damage to the Switched NEM can occur as the result of careless handling or ESD. Always handle the Switched NEM with care to avoid damage to electrostatic-sensitive components. To minimize the possibility of ESD-related damage, Oracle strongly recommends using both an antistatic mat and an ESD wrist strap. You can get an ESD wrist strap from any reputable electronics store or from Oracle as part number 250-1007. |