The list subcommand displays controller, RAID volume, and disk data. The device targets for the raidconfig list are listed in the following table.
|
The raidconfig list command supports options listed in the following table.
|
The following data is displayed. Items marked with an asterisk (*) show a brief listing; all other items show a verbose listing.
Controllers:
Node ID
Manufacturer*
Model*
Part number
Firmware(F/W) version*
Serial Number
RAID Volumes*
Disks*
Disks in use by another controller
PCI address
PCI vendor ID
PCI device ID
PCI subvendor ID
PCI subdevice ID
Battery backup status
Maximum RAID volumes
Maximum disks per RAID volume
Supported RAID levels
Maximum dedicated spares
Maximum global spares
Stripe size minimum
Stripe size maximum
Disable Auto Rebuild
Disks:
ID*
Chassis ID*
Slot ID*
Node ID
Mapped to host OS (true/false)
Device
Disabled (true/false)
In use by another controller
RAID ID*
Status*
Type*
Media*
Manufacturer
Model
Size
Serial number
NAC name
Spare state (global, dedicated, or N/A)*
Current task
Stoppable tasks
Startable tasks
Task state
Task completion percent
RAID volumes:
Logical ID (0-based)*
Node ID
Device name*
Name (user assigned)*
Status*
RAID level*
Number of disks*
Capacity*
Mounted
Stripe size
Leg size
Read cache
Write cache
Current task
Task state
Task completion percent
Stoppable tasks
Startable tasks
BIOS Boot Target