Verify the Host-to-ILOM Interconnect Settings

To verify if the Host-to-ILOM Interconnect is up and running do the following:

1. To verify the Host-to-ILOM interconnect settings, type:

   ilomconfig list interconnect

   The following is example output for this command.

   Interconnect
   ============
   State: enabled
   Type: USB Ethernet
   SP Interconnect IP Address: 169.254.182.76 
   Host Interconnect IP Address: 169.254.182.77
   Interconnect Netmask: 255.255.255.0
   SP Interconnect MAC Address: 02:21:28:57:47:16
   Host Interconnect MAC Address: 02:21:28:57:47:17
   

2. Make sure that you can ping the SP Interconnect IP Address. For example:

   ping 169.254.182.76