List Zoning Information - Oracle® Server CLI Tools User's Guide

Go to main content

Oracle^® Server CLI Tools User's Guide

Exit Print View

» ...Documentation Home » Oracle Hardware Management Pack 2.3.x ... » Oracle^® Server CLI Tools User's ... » Using zoningcli to Configure Zoning for the ... » List Zoning Information

Updated: August 2016

Oracle^® Server CLI Tools User's Guide

Document Information

Using This Documentation

Oracle Server CLI Tools Overview

Host-to-ILOM Interconnect

CLI Tools Command Syntax and Conventions

Using biosconfig to Update the BIOS

Using firmware-check to Confirm Minimum Required Firmware

Using fwupdate to Update Firmware

Using hwmgmtcli to Display Hardware Information

Using ilomconfig to Configure Oracle ILOM

Using ipmitool for Windows

Using nvmeadm to Configure an NVM Express Device

Using raidconfig to Configure RAID

Using ubiosconfig to Update the UEFI BIOS

Using zoningcli to Configure Zoning for the SPARC T3-1 Server

zoningcli Command Overview

List Zoning Information

Enable and Disable Zoning

Configure Zoning

CLI Tools Error Codes

Language:

List Zoning Information

The following procedure describes how to use the list subcommand to check the current zoning information. This enables you to see if zoning is currently enabled or disabled.

To list zoning information, type:
zoningcli list expander

The current zoning information is listed.

Copyright © 2014, 2016, Oracle and/or its affiliates. All rights reserved. Legal Notices