The ubiosconfig commands use the following command syntax:
ubiosconfig subcommand type [option]
If you use the –-help or –-version options, the ubiosconfig command does not require subcommands; otherwise one or more subcommands are mandatory.
When a command fails, it returns one of several failure codes listed in ubiosconfig Error Codes.
The options listed in the following table apply to all CLI Tools commands including ubiosconfig.
|
When accessing a service processor, ubiosconfig can be used over a local Host-to-ILOM interconnect or a remote Ethernet network connection. When issuing a ubiosconfig command that accesses the service processor, credentials are not required when using the Host-to-ILOM interconnect, but they are required for an Ethernet network connection.
The options listed in the following table are supported for ubiosconfig over a network connection.
|
For example:
ubiosconfig export all --remote_hostname=address --remote_username=username
where address is the remote host name or IP address (in xx.xx.xx.xx format) of the target server's service processor, and username is the user name with login access rights to perform the operation.
You are prompted for the password for this user name when accessing the remote Oracle ILOM service processor.
ubiosconfig supports the subcommands listed in the following table.
|