Oracle Server CLI Tools Overview

Language:

Oracle Server Command Line Interface (CLI) Tools are part of Oracle Hardware Management Pack and include a rich set of tools and agents that you run from your operating system to configure and monitor server hardware. For information on which servers support each of the CLI tools, refer to http://www.oracle.com/goto/ohmp.

The Oracle Oracle Hardware Management Pack download package includes a cross-platform installer for all components. For more information on installing Oracle Oracle Hardware Management Pack components, refer to the Oracle Hardware Management Pack Installation Guide.

Beginning with Oracle Solaris 11.2, Oracle Hardware Management Pack for Oracle Solaris has become an integrated component of the operating system. Do not download and use other versions of Oracle Hardware Management Pack that are not specifically qualified for the Oracle Solaris 11.2 (and later). For details, see http://www.oracle.com/goto/ohmp/solarisdocs.

Note - This documentation applies to servers running Oracle Solaris 11.1 and earlier or other supported operating systems. If you have Oracle Solaris 11.1 or earlier or other operating systems, continue to use Oracle Hardware Management Pack, available as a separate download from https://support.oracle.com.

The following table lists the available Oracle Server CLI Tools.

Tool	Description	Link
`biosconfig`	Configure your server's BIOS CMOS settings and host boot order. This tool is only available for systems that do not have UEFI-enabled BIOS.	Using biosconfig to Update the BIOS
`firmware-check`	Check to ensure that the server firmware is at the minimum required version.	Using firmware-check to Confirm Minimum Required Firmware
`fwupdate`	Update, query, and validate the firmware for Oracle server devices.	Using fwupdate to Update Firmware
`hwmgmtcli`	Get system information from the Oracle ILOM service processor.	Using hwmgmtcli to Display Hardware Information
`ilomconfig`	Manage Oracle ILOM configurations.	Using ilomconfig to Configure Oracle ILOM
`ipmitool`	Using ipmitool for Windows.	Using ilomconfig to Configure Oracle ILOM
`nvmeadm`	Modify the controller and device configuration on an NVM Express (NVMe) subsystem.	Using nvmeadm to Configure an NVM Express Device
`raidconfig`	Configure RAID volumes.	Using raidconfig to Configure RAID
`ubiosconfig`	Import and export your server's UEFI BIOS settings to an XML file. This tool is only available for systems that have UEFI-enabled BIOS.	Using ubiosconfig to Update the UEFI BIOS
`zoningcli`	Tool for Oracle SPARC T3-1 servers running Oracle Solaris OS. Enables you to configure systems that have the 16 disk backplane (SAS-2 expander) into two separated zones.	Using zoningcli to Configure Zoning for the SPARC T3-1 Server

For more information on other Oracle Hardware Management Pack features, see Oracle Hardware Management Pack Installation Guide and Oracle Server Management Agents User’s Guide.

For late-breaking issues and information about the CLI Tools, refer to the Oracle Hardware Management Pack 2.3.x Release Notes.