ILOM Watchdog Parameters - Oracle® Server CLI Tools User's Guide

Go to main content

Oracle^® Server CLI Tools User's Guide

Exit Print View

» ...Documentation Home » Oracle Hardware Management Pack 2.3.x ... » Oracle^® Server CLI Tools User's ... » Using ilomconfig to Configure Oracle ILOM » Managing ILOM and Host Watchdog » HMP Watchdog Overview » ILOM Watchdog Overview » ILOM Watchdog Parameters

Updated: August 2016

Oracle^® Server CLI Tools User's Guide

Document Information

Using This Documentation

Oracle Server CLI Tools Overview

Host-to-ILOM Interconnect

CLI Tools Command Syntax and Conventions

Using biosconfig to Update the BIOS

Using firmware-check to Confirm Minimum Required Firmware

Using fwupdate to Update Firmware

Using hwmgmtcli to Display Hardware Information

Using ilomconfig to Configure Oracle ILOM

ilomconfig Command Overview

ilomconfig Features

Restoring and Modifying Oracle ILOM XML Configuration Files

ilomconfig Command Syntax

Importing and Exporting XML Configurations

Export an XML Configuration

Import an XML Configuration

Listing System and SP Information

List System Summary Information

List an SNMP Community

List IPv4 Network Settings

List IPv6 Network Settings

List Service Processor Identification Information

List DNS Information

List Clock Information

Modifying Oracle ILOM Configurations

Restore Oracle ILOM to Defaults

Modify a User Password or Role

Create an SNMP Community

Modify IPv4 Network Settings

Modify IPv6 Network Settings

Modify Identification Information

Modify DNS Information

Modify Clock Information

Configuring the Host-to-ILOM Interconnect

Providing Host Credentials to the Service Processor

Enable the Host-to-ILOM Interconnect

Disable the Host-to-ILOM Interconnect

Modify the Host-to-ILOM Interconnect

List the Host-to-ILOM Interconnect Settings

Verify the Host-to-ILOM Interconnect Settings

Set Up a Credential Cache on the Host

Delete a Credential Cache on the Host

Managing ILOM and Host Watchdog

Using ipmitool for Windows

Using nvmeadm to Configure an NVM Express Device

Using raidconfig to Configure RAID

Using ubiosconfig to Update the UEFI BIOS

Using zoningcli to Configure Zoning for the SPARC T3-1 Server

CLI Tools Error Codes

Language:

ILOM Watchdog Parameters

The ILOM watchdog parameters can be set by the user in one of the following ways:

Preferred method: Use the ilomconfig modify ilomwatchdog command with the ilomwatchdog target to change the parameters. See ILOM Watchdog ilomconfig Commands.
Manually edit the configuration file. See Manually Edit the Configuration File in Oracle Server Management Agents User’s Guide.

The following table lists the ILOM watchdog parameters.

Parameter Name	Parameter in Configuration File	Description	Possible Values	Default value
Query Time Interval	`ilom_watchdog_query_time_interval`	The periodic time interval, in seconds, at which the host will send a query to Oracle ILOM. If Oracle ILOM does not respond, then this indicates that Oracle ILOM is unresponsive, and the host performs the Timer Action.	Positive integer up to 214748364	60 seconds
Timer Action	`ilom_watchdog_timer_action`	The action which the host performs when it notices that Oracle ILOM is unresponsive.	`Warning\|Reset`	Warning
Number of Consecutive SP Resets	`ilom_watchdog_number_sp_reset`	If the value of Timer Action is Reset, this parameter tells the host the number of times the host resets the SP until it gives up.	Positive integer up to 20	2
Admin State	`ilom_watchdog_admin_state`	The state which the user (Admin) sets the ILOM watchdog.	`Enable\|Disable`	Disable

Copyright © 2014, 2016, Oracle and/or its affiliates. All rights reserved. Legal Notices