Install the eUSB Drive
This is a cold-service procedure that can be performed by a customer. Power down the server completely before performing this procedure.
 | Caution - This procedure requires that you handle components that are sensitive to electrostatic discharge. Static discharges can cause the components to fail. |
-
Take the necessary ESD precautions.
See Prevent ESD Damage.
- Press the eUSB drive into the socket on the motherboard.
-
Tighten the screw to secure the drive to the motherboard.
- Install memory risers CM0/MR0, CM0/MR2 and CM0/MR3.
- Return the server to operation.