Go to main content

SPARC T7-2 Server Service Manual

Exit Print View

Updated: July 2019
 
 

Remove a DIMM


Caution

Caution  -  This procedure requires handling components that are sensitive to ESD. Follow antistatic practices to avoid damage or component failure.


DIMMs or DIMM fillers must be removed:

You can perform this procedure, but the server must first be completely powered down and all power cords unplugged. See Component Service Categories for more information about cold-service procedures.


Caution

Caution  -  Whenever you remove a DIMM or a DIMM filler, you should replace it with another DIMM or DIMM filler before powering on the server. Otherwise, the server might overheat due to improper airflow.


  1. Press down both DIMM slot ejector tabs as far as they can go.
    image:Figure showing the removal of a DIMM from a memory riser.
  2. Carefully lift the DIMM straight up and place it on an antistatic mat.

Related Information