SPARC T7-2 Server Service Manual

Determine Which Drive Is Faulty

The following LEDs are lit when a drive fault is detected:

• System Service Required LEDs on the front and rear panels.

• Service Required LED on the faulty drive.

1. Check to see if any System Service Required LEDs are lit or flashing.

   See Interpreting LEDs.

2. From the front of the server, check the drive LEDs to identify the faulty drive.

   The amber Service Required LED is lit on the drive that needs to be replaced.

   See Drive LEDs.

3. Remove the faulty drive.

   See Remove a Drive.

Related Information

• Drive LEDs

• Remove a Drive

• Install a Drive

• Verify a Drive

• Detecting and Managing Faults