Rack Compatibility
The rack into which you install Oracle Server X7-8 must meet the requirements listed in the
following table. The Oracle Rack Cabinet 1242 and Oracle's Sun Rack II Cabinet are
compatible with the server. For information on these Oracle racks, see Preparing for Server Installation.
|
|
Structure
|
Four-post rack (mounting at both
front and back) with 9.5mm square holes.
Two-post racks are not compatible.
|
Rack horizontal opening and unit vertical pitch
|
Conforms to ANSI/EIA 310-D-1992 or IEC 60297 standards.
|
Distance between front and back mounting planes
|
Minimum 61 cm and maximum 91.5 cm (24 inches to 36 inches).
|
Clearance depth in front of front mounting plane
|
Distance to front cabinet door is at least 2.54 cm (1
inch).
|
Clearance depth behind front mounting plane
|
Distance to back cabinet door is at least 80 cm (31.49
inches).
|
Clearance width between front and back mounting planes
|
Distance between structural supports and cable troughs is at least
45.6 cm (18 inches).
|
Minimum clearance for service access
|
-
Clearance, front of server: 123.2 cm (48.5 inches)
-
Clearance, back of server: 91.4 cm (36 inches)
|
|
The following table lists the Oracle Rack Cabinet 1242 rack specifications:
|
|
Usable rack units
|
42
|
Height
|
199. cm (78.74 inches)
|
Width (with side panels)
|
60 cm (23.62 inches)
|
Maximum dynamic load
|
1005 kg (2215 lbs)
|
|