|Skip Navigation Links|
|Exit Print View|
|Sun Datacenter InfiniBand Switch 36 HTML Document Collection for Firmware Version 2.0|
Displays environmental status.
This hardware command performs a series of hardware and environmental tests of the switch. This command is an amalgamation of these commands:
The command output provides voltage and temperature values, pass-fail results, and error messages.
The env_test command is available from the /SYS/Switch_Diag and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.
This example shows how to display the hardware and environmental status of the switch with the env_test command.
# env_test Environment test started: Starting Environment Daemon test: Environment daemon running Environment Daemon test returned OK Starting Voltage test: Voltage ECB OK Measured 3.3V Main = 3.27 V Measured 3.3V Standby = 3.35 V Measured 12V = 11.97 V Measured 5V = 5.02 V Measured VBAT = 3.24 V Measured 2.5V = 2.52 V Measured 1.8V = 1.78 V Measured I4 1.2V = 1.22 V Voltage test returned OK Starting PSU test: PSU 0 present OK PSU 1 present OK PSU test returned OK Starting Temperature test: Back temperature 32 Front temperature 32 SP temperature 44 Switch temperature 44, maxtemperature 46 Temperature test returned OK Starting FAN test: Fan 0 not present Fan 1 running at rpm 12075 Fan 2 running at rpm 11960 Fan 3 running at rpm 12075 Fan 4 not present FAN test returned OK Starting Connector test: Connector test returned OK Starting Onboard ibdevice test: Switch OK All Internal ibdevices OK Onboard ibdevice test returned OK Environment test PASSED #