Go to main content

Oracle® Server X5-2 Service Manual

Exit Print View

Updated: January 2018
 
 

Unmount an NVMe Storage Drive

  1. Log in to Oracle Solaris that is running on the server.
  2. To find the NVMe drive slot number, type:

    # hotplug list –lc

    This command produces output similar to the following for each of the NVMe drives installed in the server:

    # hotplug list –lc
    Connection  State    Description
    Path
    ------------------------------------------------------------------ 
    pcie13      ENABLED  PCIe-Native /pci@7a,0/pci8086,2f08@3/pci111d,80b5@4
  3. To prepare the NVMe drive for removal, that is, detach the device driver and power off the drive slot, type the following commands:

    # hotplug poweroff pcie13

    # hotplug list –lc

    The following output appears for the NVMe drive that has been unmounted:

    # hotplug list –lc
    Connection  State    Description
    Path
    ------------------------------------------------------------------
    pcie13      PRESENT  PCIe-Native /pci@7a,0/pci8086,2f08@3/pci111d,80b5@4
  4. Verify that the OK to Remove indicator (LED) on the NVMe storage drive is lit.