Go to main content

Oracle® Server X5-2 Service Manual

Exit Print View

Updated: January 2018

Remove the DVD Drive

  1. Remove any media from the DVD drive.
  2. Prepare the server for service.
    1. Power off the server and disconnect the power cords from the power supplies.

      See Powering Down the Server.

    2. Extend the server to the maintenance position.

      See Extend the Server to the Maintenance Position.

    3. Attach an antistatic wrist strap to your wrist and then to a metal area on the chassis.

      See Take Antistatic Measures.

    4. Remove the server top cover.

      See Remove the Server Top Cover.

  3. Locate the DVD drive [1].
  4. Disconnect the cable from the rear of the DVD [2].
    image:Figure showing how to remove the DVD drive.
  5. To disengage the DVD drive from the chassis, press and hold the release tab on the rear of the DVD drive up slightly [3].
  6. Gently push the DVD drive toward the front of the server, slide it out of the server, and place it on an antistatic mat [4].
  7. Place the DVD drive on an antistatic mat.

Related Information