Navigate BIOS Setup Utility
Menus
To navigate the menus or options listed on a menu, use the arrow keys. The currently selected
option or sub-menu is highlighted. For further instructions on how to navigate
and change settings in the BIOS Setup Utility, refer to the online information
provided on the menu.
- Access
the BIOS Setup Utility.
See Access BIOS Setup Utility Menus.
- Use the left and right arrow
keys to select the different primary menu options.
As you select each menu option, the top-level screen for that
menu option appears.
- To navigate options presented on
a top-level screen, use the up and down arrow keys.
Only options that can be modified are highlighted when you
press the up and down arrow keys.
- If an option
can be modified, as you select the option, user instructions for modifying
the option appear in the right column of the screen.
- If an option is a link to a sub-screen,
a description of the sub-menu content appears in the right column.
- Modify an option by pressing
the + or - keys (plus or minus keys) or by pressing Enter and selecting
the desired option from the pop-up menus.
- Press the Esc key to return from
a sub-menu screen to the previous menu screen.
Pressing Esc from a top-level menu is equivalent to selecting
the Discard Changes and Exit option from the Save & Exit Menu.
- Modify parameters as needed.
- Press the F10 key to save your changes and exit the BIOS Setup Utility.
Alternatively, you can select the Save & Exit Menu, and
then select the Save Changes and Reset to save
your changes and exit the BIOS Setup Utility.
Note - After modifying any BIOS settings and selecting Save Changes and Reset from
the Save & Exit Menu, the subsequent reboot might take longer
than a typical reboot where no settings were modified. The additional
delay is required to ensure that changes to the BIOS settings are
synchronized with Oracle ILOM.