Go to main content
Index
A
- add-in cards
- configuration utilities in Legacy BIOS Boot Mode
Configuration
Utilities for Add-In Cards
- configuration utilities in UEFI Boot Mode
Configuration
Utilities for Add-In Cards
- Advanced BIOS screen
BIOS Advanced
Menu Selections
- antistatic
- mat
Electrostatic Discharge Safety
- measures
- removing
Remove Antistatic Measures
- taking
Take Antistatic Measures
- wrist strap
Electrostatic Discharge Safety
- attaching devices to server
Attaching Devices to the Server
B
- battery
- description
Customer-Replaceable Units
- installing
Install the Battery
- removing
Remove the Battery
- BIOS
- configuring serial port sharing
Configuring Serial Port Sharing
- Ethernet ports booting priority
Ethernet Port Boot Order
- BIOS factory defaults, verifying
Verify BIOS Factory Default Settings
- BIOS Setup Utility
- accessing
Access BIOS Setup Utility Menus
- Advanced screen
BIOS Advanced
Menu Selections
- boot mode
Selecting
Legacy BIOS or UEFI Boot Mode
- Boot screen
BIOS Boot
Menu Selections
- Exit screen
BIOS Exit Menu Selections
- exiting from
Exit BIOS Setup Utility
- function keys
BIOS Key
Mappings
- IO screen
BIOS IO Menu
Selections
- Legacy Boot Mode
Selecting
Legacy BIOS or UEFI Boot Mode
- Main screen
BIOS Main
Menu Selections
- menus, accessing
Access BIOS Setup Utility Menus
- navigating menu options
Navigate BIOS Setup Utility
Menus
- service processor network settings
Configure SP Network Settings
- setup screens summary
BIOS Setup
Utility Menus
- shortcut key sequences
BIOS Key
Mappings
- TPM support
Configure TPM Support
- UEFI Boot Mode
Selecting
Legacy BIOS or UEFI Boot Mode
- UEFI-compliant, description
Using UEFI
- board components
System Chassis
Components
- boot device, selecting
Select the Boot Device
- boot mode
- preserving settings when switching
Switching Between Legacy BIOS and UEFI Boot Modes
- selecting
Select Legacy BIOS or UEFI Boot Mode
- buttons
- Fault Remind
Using the Server Fault Remind Button
- Power
Power Down Server Gracefully Using the Power Button
C
- cables
- data and power
- connecting
Reconnect Data Cables and Power Cords
- disconnecting
Disconnect Cables From the Server
- cabling the server
Attach Devices to the Rear of the Server
- chassis components
System Chassis
Components
- chassis serial number, locating
Locating the Chassis Serial Number
- components and nomenclature
System Chassis
Components
- connecting devices to server
Attaching Devices to the Server
- connector locations
Attaching Devices to the Server
- cooling unit components
Cooling
Unit Components
D
- default boot mode
Select Legacy BIOS or UEFI Boot Mode
- diagnosing
- hardware faults
Troubleshooting and Diagnostic Information
- DIMMs
- description
Customer-Replaceable Units
- fault LEDs
- inconsistencies with BIOS
Inconsistencies Between DIMM Fault Indicators and the BIOS Isolation of Failed
DIMMs
- Fault Remind Button
Inconsistencies Between DIMM Fault Indicators and the BIOS Isolation of Failed
DIMMs
- identifying failed
Identify and Remove the Failed DIMM
- installing
Install a DIMM
- physical layout
DIMM and Processor Physical Layout
- population example for optimal performance
Populating DIMMs for Optimal System Performance
- rank classification labels
DIMM Rank Classification Labels
- removing
Identify and Remove the Failed DIMM
- disk backplane
- description
Field-Replaceable Units
- installing
Install the Disk Backplane
- removing
Remove the Disk Backplane
- disk backplane components
Disk Backplane
Components
- disk components
Hard Disk
Drive Components
- disk drives See
storage drives
- DVD drive
- installing
Install the DVD Drive
- removing
Remove the DVD Drive
E
- electrostatic discharge
- prevention
Take Antistatic Measures
- safety precautions
Electrostatic Discharge Safety
- See ESD
Take Antistatic Measures
- Ethernet cables, connecting
Attach Devices to the Rear of the Server
- Ethernet ports
- booting priority
Ethernet Port Boot Order
Ethernet Port Boot Order
- device and driver naming
Ethernet Port Boot Order and Device Naming
- pinouts
10-GbE Port Signals
- Exit BIOS screen
BIOS Exit Menu Selections
- exploded view of server
Illustrated Parts Breakdown
- external cables, connecting
Attach Devices to the Rear of the Server
F
- fan modules
- description
Customer-Replaceable Units
- installing
Install a Fan Module
- removing
Remove a Fan Module
- Fault Remind button
- identifying failed processors
Remove a Processor
- location
Using the Server Fault Remind Button
- using
Using the Server Fault Remind Button
- FIM
- description
Field-Replaceable Units
- installing
Install the Front Indicator Module
- removing
Remove the Front Indicator Module
- servicing
Servicing the Front Indicator Module (FRU)
- firmware components
System Chassis
Components
- Front Indicator Module See
FIM
- function keys within BIOS Setup Utility
BIOS Key
Mappings
G
- Gigabit Ethernet ports
Gigabit
Ethernet Ports- pinouts
10-GbE Port Signals
H
- hard disk drive components
Hard Disk
Drive Components
- hard drives See
storage drives
- hardware faults
- diagnosing
Troubleshooting and Diagnostic Information
- hot-plugging storage drives
Storage Drives Hot-Plug Conditions
I
- illustrated parts breakdown
Illustrated Parts Breakdown
- installing
- battery
Install the Battery
- DIMMs
Install a DIMM
- DVD drive
Install the DVD Drive
- fan modules
Install a Fan Module
- FIM
Install the Front Indicator Module
- internal HBA card
Install the Internal HBA Card in PCIe Slot 4
- internal USB flash drive
Install an Internal USB Flash Drive
- motherboard
Install the Motherboard
- NVMe cables
Install the NVMe Cables
- Oracle PCIe NVMe switch card
Install the Oracle PCIe NVMe Switch Card in PCIe Slot 1
- PCIe risers
Install the PCIe Riser Into PCIe Slots 3 and 4
Install a PCIe Riser Into PCIe Slot 1 or 2
- power supply
Install a Power Supply
- power, FIM, disk backplane data, and DVD cables
Install the Power, FIM, Disk Backplane Data, and DVD Cables
- processors
Install a Processor
- SAS drive cables
Install the Internal HBA SAS Cable Assembly
- server into rack
Reinstall the Server Into the Rack
- storage drive
Install an NVMe Storage Drive In the Server
Install an NVMe Storage Drive in the Server
Install an HDD or SSD Storage Drive
- top cover
Install the Server Top Cover
- internal HBA card
- installing
Install the Internal HBA Card in PCIe Slot 4
- removing
Remove the Internal HBA Card From PCIe Slot 4
- internal USB flash drive
- installing
Install an Internal USB Flash Drive
- removing
Remove an Internal USB Flash Drive
- Internal USB flash drives
Customer-Replaceable Units
- IO allocation
- enabling and disabling resources
Configure I/O Resource Allocation
- IO BIOS screen
BIOS IO Menu
Selections
- IP address, setting
Configure SP Network Settings
- IPMI type
Monitoring
System Components
L
- latch release button
- storage drive
Remove an NVMe Storage Drive
Remove an NVMe Storage Drive From the Server
Remove an HDD or SSD Storage Drive
- LEDs
- power supply
Remove a Power Supply
Servicing Power Supplies (CRU)
Servicing Power Supplies (CRU)
- Legacy BIOS Boot Mode
- selecting
Selecting
Legacy BIOS or UEFI Boot Mode
- switching boot modes
Switching Between Legacy BIOS and UEFI Boot Modes
- locating chassis serial number
Locating the Chassis Serial Number
- Locator LED button
Server System-Level status Indicators
M
- Main BIOS screen
BIOS Main
Menu Selections
- memory device components
Memory Device
Components
- menus, BIOS Setup Utility
Access BIOS Setup Utility Menus
- motherboard
- description
Field-Replaceable Units
- installing
Install the Motherboard
- removing
Remove the Motherboard
- servicing
Servicing the Motherboard (FRU)
N
- NET MGT port
- pinout
Network
Management Port
Network Management Port Status Indicators
- network management port
- See NET MGT
Network Management Port Signals
- network settings, service processor
Configure SP Network Settings
- NVMe cables
- installing
Install the NVMe Cables
- removing
Removing the NVMe Cables
Removing the NVMe Cables
O
- operating system
- supported by UEFI BIOS
Selecting
Legacy BIOS or UEFI Boot Mode
- Option ROMs
- enabling and disabling
Configure Option ROM Settings
- Legacy BIOS allocation
Using BIOS for Legacy Option ROM Resource Allocation
- minimizing resource exhaustion
Using BIOS for Legacy Option ROM Resource Allocation
- Oracle Integrated Lights Out Manager (Oracle ILOM)
- key identity properties (KIP) for FRUID auto-update feature
FRU Key Identity Properties (KIP) Automated Update
- Oracle NVMe cables
- installing
Install the NVMe Cables
- Oracle PCIe NVMe switch card
- installing
Install the Oracle PCIe NVMe Switch Card in PCIe Slot 1
- removing
Remove the Oracle PCIe NVMe Switch Card From PCIe Slot 1
P
- PCIe cards
- description
Customer-Replaceable Units
- installing into slot 1 and 2
Install a PCIe Card in PCIe Slot 1 or 2
- installing into slot 3
Install a PCIe Card in PCIe Slot 3
- removing from slot 1 and 2
Remove a PCIe Card From PCIe Slot 1 or 2
- removing from slot 3
Remove a PCIe Card From PCIe Slot 3
- servicing
Servicing PCIe Cards (CRU)
- slot characteristics
PCIe Slot Characteristics
- PCIe risers
- description
Customer-Replaceable Units
- installing in slots 1 and 2
Install a PCIe Riser Into PCIe Slot 1 or 2
- installing in slots 3 and 4
Install the PCIe Riser Into PCIe Slots 3 and 4
- location and differences
PCIe Riser Location and Differences
- removing from slot 1 and 2
Remove a PCIe Riser From PCIe Slot 1 or 2
- removing from slot 3 and 4
Remove the PCIe Riser From PCIe Slots 3 and 4
- PCIe slot numbering
PCIe Slot Characteristics
- pinouts
- Ethernet ports
10-GbE Port Signals
- Gigabit Ethernet ports
10-GbE Port Signals
- RJ-45 to DB-25 crossover wiring
RJ-45 to DB-25 Adapter Crossover Wiring Reference
- RJ-45 to DB-9 crossover wiring
RJ-45 to DB-9 Adapter Crossover Wiring Reference
- SER MGT
Serial Management Port Signals
- USB port
USB Port Signals
- video connector
Video Connector
- ports
- Ethernet
Gigabit
Ethernet Ports
- Gigabit Ethernet
Gigabit
Ethernet Ports
- NET MGT
Network
Management Port
Network Management Port Status Indicators
- network management See
NET MGT
- SER MGT
Serial Management
Port
- serial management
Serial Management
Port
- USB
USB Ports
- video
Video Connector
- POST code checkpoint tests
Power On the Server
- power
- standby mode
Use the Oracle ILOM Web Interface for Immediate Shutdown
Use the Oracle ILOM CLI for Immediate Shutdown
Use the Power Button for Immediate Shutdown
- standby power mode
Disconnect Cables From the Server
- power down server
- gracefully
Power Down Server Gracefully Using the Oracle ILOM CLI
- with power button
Power Down Server Gracefully Using the Power Button
- power supply
- description
Customer-Replaceable Units
- installing
Install a Power Supply
- LEDs
Remove a Power Supply
Servicing Power Supplies (CRU)
Servicing Power Supplies (CRU)
- removing
Remove a Power Supply
- servicing
Servicing Power Supplies (CRU)
- status indicators
Power Supply Status Indicators
- power unit components
Power Unit
Components
- power, FIM, disk backplane data, and DVD cables
- installing
Install the Power, FIM, Disk Backplane Data, and DVD Cables
- removing
Removing the Power, FIM, Disk Backplane Data, and DVD Cables
- power-on self-test (POST) code checkpoint tests
Server System-Level status Indicators
- Power/OK indicator
Server System-Level status Indicators
- powering off the system
Powering Down the Server
- processor components
Processor
Components
- processor removal and replacement tool
- selecting
Selecting the Correct Processor Removal and Replacement Tool
- processor(s)
- physical layout
DIMM and Processor Physical Layout
- release lever
- disengaging
Remove a Processor
- engaging
Install a Processor
- removal and replacement tool
Install a Processor
- processors
- identifying failed
Remove a Processor
- installing
Install a Processor
- removing
Remove a Processor
- PSU See
power supply
R
- rackmount
- stabilizing the rack
Extend the Server to the Maintenance Position
- removing
- antistatic measures
Remove Antistatic Measures
- battery
Remove the Battery
- DIMMs
Identify and Remove the Failed DIMM
- disk backplane
Install the Disk Backplane
Remove the Disk Backplane
- DVD drive
Remove the DVD Drive
- fan modules
Remove a Fan Module
- FIM
Remove the Front Indicator Module
- internal HBA card
Remove the Internal HBA Card From PCIe Slot 4
- internal USB flash drive
Remove an Internal USB Flash Drive
- motherboard
Remove the Motherboard
- NVMe cables
Removing the NVMe Cables
- Oracle PCIe NVMe switch card
Remove the Oracle PCIe NVMe Switch Card From PCIe Slot 1
- power supply
Remove a Power Supply
- power, FIM, disk backplane data, and DVD cables
Removing the Power, FIM, Disk Backplane Data, and DVD Cables
- processors
Remove a Processor
- SAS drive cables
Remove the Internal HBA SAS Cable Assembly
- server from rack
Remove the Server From the Rack
- storage drive
Remove an HDD or SSD Storage Drive
S
- safety
- ESD precautions
Electrostatic Discharge Safety
- precautions
Safety Precautions
- symbols
Safety Symbols
- SAS drive cables
- installing
Install the Internal HBA SAS Cable Assembly
- removing
Remove the Internal HBA SAS Cable Assembly
- screens, BIOS Setup Utility
Access BIOS Setup Utility Menus
BIOS Setup
Utility Menus
- selecting
- processor removal and replacement tool
Selecting the Correct Processor Removal and Replacement Tool
- SER MGT
- pinouts
Serial Management Port Signals
- RJ-45 to DB-25 crossover pinouts
RJ-45 to DB-25 Adapter Crossover Wiring Reference
- RJ-45 to DB-9 crossover pinouts
RJ-45 to DB-9 Adapter Crossover Wiring Reference
- serial management port
- See SER MGT
Serial Management Port Signals
- serial number, locating
Locating the Chassis Serial Number
- serial port sharing, configuring
Configuring Serial Port Sharing
- server
- diagnosing
Troubleshooting and Diagnostic Information
- installing into rack
Reinstall the Server Into the Rack
- removing from rack
Remove the Server From the Rack
- troubleshooting
Troubleshooting Server Component Hardware Faults
- server troubleshooting, information needed when contacting support
Contacting Support
- server, power on
Access BIOS Setup Utility Menus
- service
- preparing server
Preparing the Server for Component Replacement
- returning server to operation
Returning the Server to Operation
- service processor
- network settings, configuring
Configure SP Network Settings
- shortcut key sequences in BIOS Setup Utility
BIOS Key
Mappings
- shutting down the system
- gracefully
Powering Down the Server
- gracefully using Oracle ILOM CLI
Power Down Server Gracefully Using the Oracle ILOM CLI
- gracefully using Oracle ILOM web interface
Power Down Server Gracefully Using the Oracle ILOM Web Interface
- gracefully using the Power button
Power Down Server Gracefully Using the Power Button
- immediately
Powering Down the Server
- immediately using Oracle ILOM CLI
Use the Oracle ILOM CLI for Immediate Shutdown
- immediately using Oracle ILOM web interface
Use the Oracle ILOM Web Interface for Immediate Shutdown
- immediately using the Oracle ILOM CLI
Use the Oracle ILOM CLI for Immediate Shutdown
- immediately using the Power button
Use the Oracle ILOM Web Interface for Immediate Shutdown
Use the Power Button for Immediate Shutdown
- Simple Network Management Protocol (SNMP) Traps
- generated by system
Identifying
SNMP Trap Messages
- standby power
Use the Oracle ILOM Web Interface for Immediate Shutdown
Use the Oracle ILOM CLI for Immediate Shutdown
Use the Power Button for Immediate Shutdown
- status indicators
- power supply
Power Supply Status Indicators
- storage drive
Storage Drive Status Indicators
- stop command
Power Down Server Gracefully Using the Oracle ILOM CLI
- storage drive
- description
Customer-Replaceable Units
- hot-plugging
Storage Drives Hot-Plug Conditions
- identification
Remove an NVMe Storage Drive
Remove an NVMe Storage Drive From the Server
Remove an HDD or SSD Storage Drive
- installing
Install an NVMe Storage Drive In the Server
Install an NVMe Storage Drive in the Server
Install an HDD or SSD Storage Drive
- latch release button
Remove an NVMe Storage Drive
Remove an NVMe Storage Drive From the Server
Remove an HDD or SSD Storage Drive
- removing
Remove an HDD or SSD Storage Drive
- status indicators
Storage Drive Status Indicators
- support for product
Contacting Support
- system board components
System Board
Components
- system chassis components
System Chassis
Components
- system components and nomenclature
Monitoring
System Components
- system firmware components
Entity Presence Events
Memory Events
Fan Events
Power Events
Hard Disk
Drive Events
Environmental Events
System Firmware
Components
T
- technical support
Contacting Support
- tools required
Required Tools
- top cover
- installing
Install the Server Top Cover
Install the Server Top Cover
- removing
Remove the Server Top Cover
- troubleshooting
- information needed when contacting support
Contacting Support
- overview
Troubleshooting With Diagnostic Tools
- server
Troubleshooting Server Component Hardware Faults
- Trusted Platform Module (TPM), configuring support for
Configure TPM Support
U
- UEFI Boot Mode
- advantages of using
UEFI Boot Mode Advantages
- selecting
Selecting
Legacy BIOS or UEFI Boot Mode
- supported operating systems
Selecting
Legacy BIOS or UEFI Boot Mode
- UEFI Boot Mode, switching between Legacy BIOS and UEFI modes
Switching Between Legacy BIOS and UEFI Boot Modes
- UEFI-compliant BIOS, description
Using UEFI
- USB port
- pinouts
USB Port Signals
V
- video port
- pinouts
Video Connector
W
- weight of server
Remove the Server From the Rack