Use the Power Button for Immediate Shutdown

Language:

Caution - An immediate power down might corrupt system data, therefore, only use this procedure to power down the server after attempting the graceful power down procedure.

Press and hold the Power button for four seconds to force the main power off and to enter standby power mode.
When main power is off, the Power/OK LED on the front panel will begin flashing, indicating that the server is in standby power mode. See Server System-Level Status Indicators.

Disconnect the power and data cables from the server.

See Disconnect Cables From the Server.

Caution - When you press the Power button to enter standby power mode, power is still directed to the service processor remote management subsystem and power supply fans. To completely power off the server, you must disconnect the power cords from the power supplies.

Related Information

Table 1, Server System-Level status Indicators
Power Down Server Gracefully Using the Oracle ILOM CLI
Power Down Server Gracefully Using the Oracle ILOM Web Interface
Power Down Server Gracefully Using the Power Button
Use the Oracle ILOM CLI for Immediate Shutdown
Use the Oracle ILOM Web Interface for Immediate Shutdown
Power On the Server