Install an NVMe Storage Drive in the Server
Perform this procedure to physically install an NVMe
storage drive into the server.
After you physically remove an NVMe storage drive
from the server, wait at least 10 seconds before
installing a replacement drive.
Remove the replacement drive from its packaging
and place the drive on an antistatic mat.
If necessary, remove the drive filler
Align the replacement drive with the drive
The drive is physically addressed according to the
slot in which it is installed. It is important to
install a replacement drive in the same slot as the
drive that was removed.
Slide the drive into the slot until the drive is
See Step 1.
Close the drive latch to lock the drive in