# cfgadm -al
# cfgadm -al
In this example, a device is added to the controller c3.
# cfgadm -al Ap_Id Type Receptacle Occupant Condition c2 scsi-bus connected configured unknown c2::dsk/c2t0d0 CD-ROM connected configured unknown c3 scsi-sas connected configured unknown c3::dsk/c3t0d0 disk connected configured unknown c3::dsk/c3t1d0 disk connected configured unknown c3::dsk/c3t2d0 disk connected configured unknown # cfgadm -x insert_device c3 Adding device to SCSI HBA: /devices/pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2 This operation will suspend activity on SCSI bus: c3 Continue (yes/no)? y SCSI bus quiesced successfully. It is now safe to proceed with hotplug operation.
After the device is added and power to the device is turned on, the operation continues with a prompt.
Enter y if operation is complete or n to abort (yes/no)? y
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c2 scsi-bus connected configured unknown
c2::dsk/c2t0d0 CD-ROM connected configured unknown
c3 scsi-sas connected configured unknown
c3::dsk/c3t0d0 disk connected configured unknown
c3::dsk/c3t1d0 disk connected configured unknown
c3::dsk/c3t2d0 disk connected configured unknown
c3::dsk/c3t3d0 disk connected configured unknownA disk is added to c3.