|
|
|
Language
|
Select from the list of available languages for the OS.
|
English*
|
Locale
|
Select your geographic region from the list of available
locales.
|
|
Terminal
|
Select the type of terminal that you are using from the list of
available terminal types.
|
|
Network connection
|
Is the system connected to a network?
|
|
DHCP
|
Can the system use Dynamic Host Configuration Protocol (DHCP) to
configure its network interfaces?
|
|
If you are not using DHCP, note the network address:
|
IP address
|
Supply the IP address for the system.
Example: 192.168.100.1
|
|
Subnet
|
Is the system part of a subnet?
If yes, what is the netmask of the subnet?
Example: 255.255.255.0
|
255.255.0.0*
|
IPv6
|
Do you want to enable IPv6 on this machine?
|
|
Host name
|
Choose a host name for the system.
|
|
Kerberos
|
Do you want to configure Kerberos security on this machine?
If yes, gather this information:
|
|
Name service
|
Name service
|
If applicable, which name service will this system use?
|
|
Domain name
|
Provide the name of the domain in which the system resides.
|
DNS or NIS
|
NIS+ and NIS
|
If you chose NIS+ or NIS, do you want to
specify a name server, or let the installation program find one?
|
If you choose NIS:
|
DNS
|
If you chose DNS, provide IP addresses for
the DNS server. You must enter at least one IP address, but you can
enter up to three addresses.
You can also enter a list of DNS domains to search when a DNS
query is made.
Search domain:
Search domain:
Search domain:
|
|
LDAP
|
If you chose LDAP, provide this information
about your LDAP profile:
-
Profile name:
-
Profile server:
If you specify a proxy credential level in your LDAP profile,
gather this information:
|
|
Default route
|
Do you want to specify a default route IP address, or let the OS
installation program find one?
The default route provides a bridge that forwards traffic between
two physical networks. An IP address is a unique number that
identifies each host on a network.
You have these choices:
-
You can specify the IP address. An
/etc/defaultrouter file is created
with the specified IP address. When the system is rebooted,
the specified IP address becomes the default route.
-
You can let the OS installation program detect an IP
address. However, the system must be on a subnet that has a
router that advertises itself by using the ICMP for router
discovery. If you are using the CLI, the software detects an
IP address when the system is booted.
-
You can select None if you do not have a router or do not
want the software to detect an IP address at this time. The
software automatically tries to detect an IP address on
reboot.
|
-
Specify one
-
Detect One
-
None*
|
Time zone
|
How do you want to specify your default time zone?
|
-
Geographic region*
-
Offset from GMT
-
Time zone file
|
Root password
|
Choose a root password for the system.
|
|