phys-schost# プロンプトは、グローバルクラスタのプロンプトを表します。この手順は、グローバルクラスタ上で実行します。
この手順では、長形式の Oracle Solaris Cluster コマンドを使用して説明します。多くのコマンドには短縮形もあります。コマンド名の形式の長短を除き、コマンドは同一です。
始める前に
root 役割以外のユーザーが status サブコマンドを使用するには、承認 solaris.cluster.read が必要です。
% cluster show
グローバルクラスタのノードから、次の手順のステップをすべて実行します。
cluster show コマンドをグローバルクラスタノードから実行すると、そのクラスタに関する詳細な構成情報が表示され、ゾーンクラスタが構成されていれば、ゾーンクラスタの情報も表示されます。
ゾーンクラスタのみに関する構成情報を表示するには、clzonecluster show コマンドも使用できます。ゾーンクラスタのプロパティーには、ゾーンクラスタ名、IP タイプ、自動ブート、ゾーンパスなどがあります。show サブコマンドは、ゾーンクラスタの内部で実行され、そのゾーンクラスタのみが対象になります。ゾーンクラスタノードから clzonecluster show コマンドを実行すると、そのゾーンクラスタから認識可能なオブジェクトのみのステータスが得られます。
cluster コマンドでより多くの情報を表示するには、冗長オプションを使用します。詳細は、cluster(8CL) のマニュアルページを参照してください。clzonecluster の詳細は、clzonecluster(8CL) のマニュアルページを参照してください。
次に、グローバルクラスタの構成情報の例を示します。ゾーンクラスタが構成されている場合は、ゾーンクラスタの情報も表示されます。
phys-schost# cluster show
=== Cluster ===
Cluster Name: cluster-1
clusterid: 0x4DA2C888
installmode: disabled
heartbeat_timeout: 10000
heartbeat_quantum: 1000
private_netaddr: 192.0.2.0
private_netmask: 255.255.248.0
max_nodes: 64
max_privatenets: 10
num_zoneclusters: 12
udp_session_timeout: 480
concentrate_load: False
global_fencing: prefer3
Node List: phys-schost-1
Node Zones: phys_schost-2:za
=== Host Access Control ===
Cluster name: clustser-1
Allowed hosts: phys-schost-1, phys-schost-2:za
Authentication Protocol: sys
=== Cluster Nodes ===
Node Name: phys-schost-1
Node ID: 1
Enabled: yes
privatehostname: clusternode1-priv
reboot_on_path_failure: disabled
globalzoneshares: 3
defaultpsetmin: 1
quorum_vote: 1
quorum_defaultvote: 1
quorum_resv_key: 0x43CB1E1800000001
Transport Adapter List: net1, net3
--- Transport Adapters for phys-schost-1 ---
Transport Adapter: net1
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): net
Adapter Property(device_instance): 1
Adapter Property(lazy_free): 1
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 192.0.2.1
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
Transport Adapter: net3
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): net
Adapter Property(device_instance): 3
Adapter Property(lazy_free): 0
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 192.0.2.12
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
--- SNMP MIB Configuration on phys-schost-1 ---
SNMP MIB Name: Event
State: Disabled
Protocol: SNMPv2
--- SNMP Host Configuration on phys-schost-1 ---
--- SNMP User Configuration on phys-schost-1 ---
SNMP User Name: foo
Authentication Protocol: MD5
Default User: No
Node Name: phys-schost-2:za
Node ID: 2
Type: cluster
Enabled: yes
privatehostname: clusternode2-priv
reboot_on_path_failure: disabled
globalzoneshares: 1
defaultpsetmin: 2
quorum_vote: 1
quorum_defaultvote: 1
quorum_resv_key: 0x43CB1E1800000002
Transport Adapter List: e1000g1, nge1
--- Transport Adapters for phys-schost-2 ---
Transport Adapter: e1000g1
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): e1000g
Adapter Property(device_instance): 2
Adapter Property(lazy_free): 0
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 192.0.2.13
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
Transport Adapter: nge1
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): nge
Adapter Property(device_instance): 3
Adapter Property(lazy_free): 1
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 192.0.2.2
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
--- SNMP MIB Configuration on phys-schost-2 ---
SNMP MIB Name: Event
State: Disabled
Protocol: SNMPv2
--- SNMP Host Configuration on phys-schost-2 ---
--- SNMP User Configuration on phys-schost-2 ---
=== Transport Cables ===
Transport Cable: phys-schost-1:e1000g1,switch2@1
Cable Endpoint1: phys-schost-1:e1000g1
Cable Endpoint2: switch2@1
Cable State: Enabled
Transport Cable: phys-schost-1:nge1,switch1@1
Cable Endpoint1: phys-schost-1:nge1
Cable Endpoint2: switch1@1
Cable State: Enabled
Transport Cable: phys-schost-2:nge1,switch1@2
Cable Endpoint1: phys-schost-2:nge1
Cable Endpoint2: switch1@2
Cable State: Enabled
Transport Cable: phys-schost-2:e1000g1,switch2@2
Cable Endpoint1: phys-schost-2:e1000g1
Cable Endpoint2: switch2@2
Cable State: Enabled
=== Transport Switches ===
Transport Switch: switch2
Switch State: Enabled
Switch Type: switch
Switch Port Names: 1 2
Switch Port State(1): Enabled
Switch Port State(2): Enabled
Transport Switch: switch1
Switch State: Enabled
Switch Type: switch
Switch Port Names: 1 2
Switch Port State(1): Enabled
Switch Port State(2): Enabled
=== Quorum Devices ===
Quorum Device Name: d3
Enabled: yes
Votes: 1
Global Name: /dev/did/rdsk/d3s2
Type: shared_disk
Access Mode: scsi3
Hosts (enabled): phys-schost-1, phys-schost-2
Quorum Device Name: qs1
Enabled: yes
Votes: 1
Global Name: qs1
Type: quorum_server
Hosts (enabled): phys-schost-1, phys-schost-2
Quorum Server Host: 10.11.114.83
Port: 9000
=== Device Groups ===
Device Group Name: testdg3
Type: SVM
failback: no
Node List: phys-schost-1, phys-schost-2
preferenced: yes
numsecondaries: 1
diskset name: testdg3
=== Registered Resource Types ===
Resource Type: SUNW.LogicalHostname:2
RT_description: Logical Hostname Resource Type
RT_version: 4
API_version: 2
RT_basedir: /usr/cluster/lib/rgm/rt/hafoip
Single_instance: False
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: True
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.SharedAddress:2
RT_description: HA Shared Address Resource Type
RT_version: 2
API_version: 2
RT_basedir: /usr/cluster/lib/rgm/rt/hascip
Single_instance: False
Proxy: False
Init_nodes: <Unknown>
Installed_nodes: <All>
Failover: True
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.HAStoragePlus:4
RT_description: HA Storage Plus
RT_version: 4
API_version: 2
RT_basedir: /usr/cluster/lib/rgm/rt/hastorageplus
Single_instance: False
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: False
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.haderby
RT_description: haderby server for Oracle Solaris Cluster
RT_version: 1
API_version: 7
RT_basedir: /usr/cluster/lib/rgm/rt/haderby
Single_instance: False
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: False
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.sctelemetry
RT_description: sctelemetry service for Oracle Solaris Cluster
RT_version: 1
API_version: 7
RT_basedir: /usr/cluster/lib/rgm/rt/sctelemetry
Single_instance: True
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: False
Pkglist: <NULL>
RT_system: True
Global_zone: True
=== Resource Groups and Resources ===
Resource Group: HA_RG
RG_description: <Null>
RG_mode: Failover
RG_state: Managed
Failback: False
Nodelist: phys-schost-1 phys-schost-2
--- Resources for Group HA_RG ---
Resource: HA_R
Type: SUNW.HAStoragePlus:4
Type_version: 4
Group: HA_RG
R_description:
Resource_project_name: SCSLM_HA_RG
Enabled{phys-schost-1}: True
Enabled{phys-schost-2}: True
Monitored{phys-schost-1}: True
Monitored{phys-schost-2}: True
Resource Group: cl-db-rg
RG_description: <Null>
RG_mode: Failover
RG_state: Managed
Failback: False
Nodelist: phys-schost-1 phys-schost-2
--- Resources for Group cl-db-rg ---
Resource: cl-db-rs
Type: SUNW.haderby
Type_version: 1
Group: cl-db-rg
R_description:
Resource_project_name: default
Enabled{phys-schost-1}: True
Enabled{phys-schost-2}: True
Monitored{phys-schost-1}: True
Monitored{phys-schost-2}: True
Resource Group: cl-tlmtry-rg
RG_description: <Null>
RG_mode: Scalable
RG_state: Managed
Failback: False
Nodelist: phys-schost-1 phys-schost-2
--- Resources for Group cl-tlmtry-rg ---
Resource: cl-tlmtry-rs
Type: SUNW.sctelemetry
Type_version: 1
Group: cl-tlmtry-rg
R_description:
Resource_project_name: default
Enabled{phys-schost-1}: True
Enabled{phys-schost-2}: True
Monitored{phys-schost-1}: True
Monitored{phys-schost-2}: True
=== DID Device Instances ===
DID Device Name: /dev/did/rdsk/d1
Full Device Path: phys-schost-1:/dev/rdsk/c0t2d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d2
Full Device Path: phys-schost-1:/dev/rdsk/c1t0d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d3
Full Device Path: phys-schost-2:/dev/rdsk/c2t1d0
Full Device Path: phys-schost-1:/dev/rdsk/c2t1d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d4
Full Device Path: phys-schost-2:/dev/rdsk/c2t2d0
Full Device Path: phys-schost-1:/dev/rdsk/c2t2d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d5
Full Device Path: phys-schost-2:/dev/rdsk/c0t2d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d6
Full Device Path: phys-schost-2:/dev/rdsk/c1t0d0
Replication: none
default_fencing: global
=== NAS Devices ===
Nas Device: nas_filer1
Type: sun_uss
nodeIPs{phys-schost-2}: 192.0.2.22
nodeIPs{phys-schost-1 192.0.2.23
User ID: root
使用例 6 ゾーンクラスタの構成を表示する
次の例では、RAC を使用したゾーンクラスタ構成のプロパティーを一覧表示します。
% clzonecluster show === Zone Clusters === Zone Cluster Name: sczone zonename: sczone zonepath: /zones/sczone autoboot: TRUE ip-type: exclusive enable_priv_net: TRUE --- Solaris Resources for sczone --- Resource Name: net address: 172.16.0.1 physical: auto Resource Name: net address: 172.16.0.2 physical: auto Resource Name: fs dir: /local/ufs-1 special: /dev/md/ds1/dsk/d0 raw: /dev/md/ds1/rdsk/d0 type: ufs options: [logging] --- Zone Cluster Nodes for sczone --- Node Name: sczone-1 physical-host: sczone-1 hostname: lzzone-1 Node Name: sczone-2 physical-host: sczone-2 hostname:lzzone-2
clnasdevice show サブコマンドまたは Oracle Solaris Cluster Manager を使用して、グローバルまたはゾーンクラスタ用に構成された NAS デバイスを表示することもできます。詳細は、clnasdevice(8CL) のマニュアルページを参照してください。